Probably been asked a million times

Supertrowel · Post by **Supertrowel** » Mon Sep 08, 2014 6:47 pm

Hi.
I am a newb were the naze 32 is concerned.
I can't get the driver to work on my mac,
Could you please point me in the right direction please.

Just dosnt recognise the USB port.

Thanks for your time in advance :mrgreen:

vyizis · Post by **vyizis** » Mon Sep 08, 2014 8:21 pm

What version of osx are you using?

Supertrowel · Post by **Supertrowel** » Mon Sep 08, 2014 9:46 pm

The latest

vyizis · Post by **vyizis** » Mon Sep 08, 2014 11:09 pm

If by latest you mean 10.10 then that's your problem right there

Supertrowel · Post by **Supertrowel** » Mon Sep 08, 2014 11:20 pm

IOS X

Why would that be a problem? :/

Will see if I can revert somehow

vyizis · Post by **vyizis** » Mon Sep 08, 2014 11:32 pm

Apple changed the rules and the kernel level driver will not load on startup with the current SiLabs driver package as it is not signed.

They will be releasing a new driver package when the final version of the os is released.

Supertrowel · Post by **Supertrowel** » Tue Sep 09, 2014 2:40 pm

Cool thank you

I just went out and bought a cheap note book.
And I still can't get the driver working?

What am I doing that's wrong..

waltr · Post by **waltr** » Tue Sep 09, 2014 5:07 pm

Supertrowel wrote:Cool thank you

I just went out and bought a cheap note book.
And I still can't get the driver working?

What am I doing that's wrong..

What OS on the notebook???????
What have you done/tried??

I have been able to install the SiLabs driver on Win8.1 without issues.

Supertrowel · Post by **Supertrowel** » Wed Sep 10, 2014 9:33 am

I downloaded the windows Xp version.
Un zip files then select driver package installer.
Select run program.
It then tells me I'm ready to connect my device.

Press finish.

Go to google base flight

Com port 1
115200

Press connect
Serial port successfully opened with id 21
No configuration within 10 seconds, communication failed
Serial port successfully closed

waltr · Post by **waltr** » Wed Sep 10, 2014 4:00 pm

In the Windows Device Manager did you check that the USB really is on COM 1?????

Supertrowel · Post by **Supertrowel** » Wed Sep 10, 2014 4:43 pm

waltr · Post by **waltr** » Wed Sep 10, 2014 7:32 pm

Strange! Is there anything connected to the TDX/RDX lines on the naze?
It is always best to start with just the FC board and nothing else connected except the USB.
Of course it could be a bad board. If it still doesn't work contact the seller for an RMA.

Supertrowel · Post by **Supertrowel** » Thu Sep 11, 2014 7:09 pm

its probably just me

Supertrowel · Post by **Supertrowel** » Fri Sep 12, 2014 8:34 am

I dont suppose their is anyone from the UK on here?
Preferably Devon area

MultiWii