HK FC ( AIOP V2 and 328P ) issue after upload MW 2.3

[xavierdusud]

Greetings folks,

Just to dig more into my issue regarding the MW 2.3 code. Got 2 differents cards from HK but got the same issue => no more upload possible
AIOP v2 and 328P are my concern but I don't have anymore.

They were running both in MW2.1 but as soon I did upload MW2.3 code, I am no more able to upload any new code. Let me explain :
- in MW2.3 tried to change min_throttle, tried to upload new sketch, but value still the same ( 1300 for my AIOP ouch ! ), I don't have any error from ARDUINO IDE.
- Tried to push back MW2.2 but saying many compilation errors
- Tried to clear EEPROM saying the exact same errors.
- All the .cpp errrors is refering to the previous path of my MW2.3 code.

Got that on my AIOP first, fair enough, issue with this card only. Re order new one, all is fine in 2.2, then upgrade again, boom, same issue, I cannot push new value.

I would advice to stay in MW2.2 with HK cards, but the issue is maybe/surely me

Am I alone ?

[Olivier_C]

It's weird I have this board, running MW 2.3, no problem at all.

Just to be sure we're talking about the same board, it's this one :

http://hobbyking.com/hobbyking/store/__ ... _V2_0.html

[xavierdusud]

yeah exactly. So there is something wrong on my side I believe. I did not face the issue just after the upgrade but after some sketch upload. What is worrying me is that I have the same issue on my 328P ( hopefully stuck @ 1069 min_throttle ).
One more thing, other parameters are changing ( quad to tri then back to quad ) Only throttle is making my day hard.