Noccopter on tour :)
Noccopter on tour :)
Hey guys, wanted to share some adventures in this blog.
FIrst i want to share a snowboard promotion, where i took my copter on board
Feel free to ask if there are questions. Share your adventures if you like! Let me know what u think.
Greetz Noc
Video ->
-
-
FIrst i want to share a snowboard promotion, where i took my copter on board
Feel free to ask if there are questions. Share your adventures if you like! Let me know what u think.
Greetz Noc
Video ->
-
-
Last edited by Noctaro on Fri Apr 05, 2013 6:46 pm, edited 1 time in total.
Re: Noccopter on tour :)
Ok guys, here we go, 2012-2013 summary.
Please keep in mind that i had the exclusive permissions and mission from eventmasters to get those captures. I did tons of testflights before moving my copter to events. In order to keep it as safe as possible. At events i stood only a few meters away of the flightspots (no FPV) to see the exact behaviour of my copter. I was registrated and would have taken full responibility if something would have gone wrong. You may still share your critics, i am open for discussion
Hope you like it!
greetz Noc
Please keep in mind that i had the exclusive permissions and mission from eventmasters to get those captures. I did tons of testflights before moving my copter to events. In order to keep it as safe as possible. At events i stood only a few meters away of the flightspots (no FPV) to see the exact behaviour of my copter. I was registrated and would have taken full responibility if something would have gone wrong. You may still share your critics, i am open for discussion
Hope you like it!
greetz Noc
Last edited by Noctaro on Fri Apr 05, 2013 6:47 pm, edited 1 time in total.
- NikTheGreek
- Posts: 348
- Joined: Thu Dec 08, 2011 4:17 pm
- Location: Greece
- Contact:
Re: Noccopter on tour :)
thx
here the newest video i took part with my copter!
here the newest video i took part with my copter!
Re: Noccopter on tour :)
Some testflights in nature, between trees, at river ......
Hope you like it!
Greetz Noc
Hope you like it!
Greetz Noc
Re: Noccopter on tour :)
Some more paintball action and my first bird formation flight
Hope you enjoy
Greetz Noc
Hope you enjoy
Greetz Noc
Re: Noccopter on tour :)
Hey all!
Up for some dirty copter bike action?
Watch the last captures i did at bikepark "Semmering" in "Austria".
Hope you enjoy
Greetz Noc
Up for some dirty copter bike action?
Watch the last captures i did at bikepark "Semmering" in "Austria".
Hope you enjoy
Greetz Noc
Re: Noccopter on tour :)
Hey all!
Want some Volt?
Her we go! Noccopter @ Volt Skate Exposition Vienna
Hope you like it!
Greetz Noc
Want some Volt?
Her we go! Noccopter @ Volt Skate Exposition Vienna
Hope you like it!
Greetz Noc
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Noccopter on tour :)
Hey,
nice, you are fully into to the radical stuff Noc!
Keep them coming.
I have been far for some time because my main computer (MAC) have been crashed with logic board errors and heating problems, I am online again
Cheers,
-KV
nice, you are fully into to the radical stuff Noc!
Keep them coming.
I have been far for some time because my main computer (MAC) have been crashed with logic board errors and heating problems, I am online again
Cheers,
-KV
Re: Noccopter on tour :)
Welcome back KV!
Sorry i was kind of lazy at answering my posts for some time.
I am still alive
And here are my newest adventures ->
This where the most smooth flights i have done until now. All in Acro ->
Ready for some dirty downhill motocross teambattle from quadcopterview? ->
Hope you like it! Big up at all of you Multiwiis for making this possible
Greetz Noc
Sorry i was kind of lazy at answering my posts for some time.
I am still alive
And here are my newest adventures ->
This where the most smooth flights i have done until now. All in Acro ->
Ready for some dirty downhill motocross teambattle from quadcopterview? ->
Hope you like it! Big up at all of you Multiwiis for making this possible
Greetz Noc
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Noccopter on tour :)
Awesome as always Noc Thumbs up
I feel your ship with an awesome rigidity=(rock stable) without any unwanted vibes, I can also feel that you are shooting in Acro, just love it!
Cheers,
-KV
Edit: what I meant to say with my reply to your reply on my topic viewtopic.php?f=9&t=3433&start=30#p42117 was that you were being super kind when you said that the footage was impressive, in fact I think that it is not... because of what i describe. Also, after many time spent searching for the tearing problem I decided to design a new frame from scratch instead of keeping the same frame and change motors, props (diameter), batteries (3s to 4s)... and so on. This way I will go for a new entire setup from scratch, I think that after some years around this I would be able to design exactly what a pilot needs, not because i am a good designer but because I really use them to fly.
Again, a big thanks for your friendship and kind words.
And yes to your question, I was using a vibe dampener, the copter is a Spidex v1 and it already have a vibe dampener using the batts weight as counter balance to cameras weight...
I feel your ship with an awesome rigidity=(rock stable) without any unwanted vibes, I can also feel that you are shooting in Acro, just love it!
Cheers,
-KV
Edit: what I meant to say with my reply to your reply on my topic viewtopic.php?f=9&t=3433&start=30#p42117 was that you were being super kind when you said that the footage was impressive, in fact I think that it is not... because of what i describe. Also, after many time spent searching for the tearing problem I decided to design a new frame from scratch instead of keeping the same frame and change motors, props (diameter), batteries (3s to 4s)... and so on. This way I will go for a new entire setup from scratch, I think that after some years around this I would be able to design exactly what a pilot needs, not because i am a good designer but because I really use them to fly.
Again, a big thanks for your friendship and kind words.
And yes to your question, I was using a vibe dampener, the copter is a Spidex v1 and it already have a vibe dampener using the batts weight as counter balance to cameras weight...
Re: Noccopter on tour :)
Hey KV,
i am serious about what i said, that pans are smooth and you get the right POV in the landscapes, that just impressed me. I am excited about your new frame and understand your hardware problem. My copter is also close to its limits, with strong wind (around 30km/h~60km/h) it is flyable, but far from stable due to lack of power... Btw. I also still use the same motors, i used as i joined Multiwii
Those Robbe Roxxys seem to be trustworthy.
KV, maybe give this anti-vibration mount a try!
It is a difference like day and night. And be sure it is mounted directly under your cam and the gimbal plate that holds your cam. I bet it would improve your footage. It outplays most dampening mounts i have seen so far. DIY FTW -> viewtopic.php?f=9&t=1223
Btw. if you flip your mount around 180° so the cam is hanging on the ohropax, the result will be even better.
Thank you also for your kind words about my videos that motivates.
The PID meditation you recommended me, was the base for my last footage dude And all the work you did on KV OSD....it made me so much more flexible it is sooo usefull! Thank you!
I am currently also thinking about a redesign for my quad. I also developed my current frame in CAD, but did cut it out by hand.
Have to say that my current frame is extremely robust. No crash could lead to damage further then a broken prop. But its weight/flightime performance sucks....only 10 Minutes on 3s 3000mah...need 74% throttle to hover with current 750KV Motor/GWS 10x6x3 prop setup. These props are so damn smooth....They should be produced in 11"....
Greetz Noc
P.S. yes, my copter needs tires! why? you will see in my next vid
i am serious about what i said, that pans are smooth and you get the right POV in the landscapes, that just impressed me. I am excited about your new frame and understand your hardware problem. My copter is also close to its limits, with strong wind (around 30km/h~60km/h) it is flyable, but far from stable due to lack of power... Btw. I also still use the same motors, i used as i joined Multiwii
Those Robbe Roxxys seem to be trustworthy.
KV, maybe give this anti-vibration mount a try!
It is a difference like day and night. And be sure it is mounted directly under your cam and the gimbal plate that holds your cam. I bet it would improve your footage. It outplays most dampening mounts i have seen so far. DIY FTW -> viewtopic.php?f=9&t=1223
Btw. if you flip your mount around 180° so the cam is hanging on the ohropax, the result will be even better.
Thank you also for your kind words about my videos that motivates.
The PID meditation you recommended me, was the base for my last footage dude And all the work you did on KV OSD....it made me so much more flexible it is sooo usefull! Thank you!
I am currently also thinking about a redesign for my quad. I also developed my current frame in CAD, but did cut it out by hand.
Have to say that my current frame is extremely robust. No crash could lead to damage further then a broken prop. But its weight/flightime performance sucks....only 10 Minutes on 3s 3000mah...need 74% throttle to hover with current 750KV Motor/GWS 10x6x3 prop setup. These props are so damn smooth....They should be produced in 11"....
Greetz Noc
P.S. yes, my copter needs tires! why? you will see in my next vid
Last edited by Noctaro on Wed Nov 20, 2013 8:12 pm, edited 5 times in total.
Re: Noccopter on tour :)
Hey people!
Some nice FPV training flights? Extra nice lightplay? Some close and fast under the tree action?
ooohhh yeah, i did it
Hope you like it!
Greetz Noc
btw. still on dev r1555, will test new release as soon as possible.
Some nice FPV training flights? Extra nice lightplay? Some close and fast under the tree action?
ooohhh yeah, i did it
Hope you like it!
Greetz Noc
btw. still on dev r1555, will test new release as soon as possible.
Re: Noccopter on tour :)
New Quadcopter design in progress
It was inspired by teslaheds design! I like this design idea!
Btw. teslahed, if you read this, have to say i was quite impressed by your video. Your copter behaves great! Looking forward to some onboard captures!
Enough talking, picture does the explaination
Legend:
*green -> FC-Case
*pink -> Bottom plate
*skyblue -> Top plate
*darkblue -> Cam (170° FOV)
*black -> Motors/Props/Arms
Measurement = cm
Hope you like it!
Greetz Noc
Btw. the top plate will be covered with alu foil to get accurate mag readings -> viewtopic.php?f=16&t=3082
It was inspired by teslaheds design! I like this design idea!
Btw. teslahed, if you read this, have to say i was quite impressed by your video. Your copter behaves great! Looking forward to some onboard captures!
Enough talking, picture does the explaination
Legend:
*green -> FC-Case
*pink -> Bottom plate
*skyblue -> Top plate
*darkblue -> Cam (170° FOV)
*black -> Motors/Props/Arms
Measurement = cm
Hope you like it!
Greetz Noc
Btw. the top plate will be covered with alu foil to get accurate mag readings -> viewtopic.php?f=16&t=3082
Re: Noccopter on tour :)
Just for fun. Some old captures.
Some design update:
Hope you like it.
Greetz Noc
Some design update:
Hope you like it.
Greetz Noc
Re: Noccopter on tour :)
Hi all!
Like art? Like graffiti?
Watch my newest Video. Only a few coptershot due to very strong wind around 30-70km/h .
Hope you still like it!
Greetz Noc
Like art? Like graffiti?
Watch my newest Video. Only a few coptershot due to very strong wind around 30-70km/h .
Hope you still like it!
Greetz Noc