Understanding the code
Understanding the code
I want to understand how the code works , the basics of the multiwii code do you know where i could find a digram that explains some functions of it or a flow chart ? A diagram of such will help me understand the code better but there wasn`t any on the internet,nothing related to a quadrocopter code , not mentioning multiwii.
- Berlin_Crash_Pilot
- Posts: 6
- Joined: Fri Dec 02, 2016 11:12 am
- Location: Berlin
- Contact:
Re: Understanding the code
Hello everybody, I wonder a little that there is no answer to this question. Is this too much a newbee-question ? Or ist this a good kept secret that seperates men from boys ?
I am also very interested in understanding the code and would be glad for any kind of information or even a link to an information source.
Thanks guys.
I am also very interested in understanding the code and would be glad for any kind of information or even a link to an information source.
Thanks guys.
Re: Understanding the code
to the best of my knowledge no such document exists.
Basically init() and loop() are straight forward. RXinput and motors/servos outputs are handled via interrupts.
From therre, your best luck is to read the code or ask specific questions.
Most people seem to prefer the readymade firmwares for 32bit boards these days
Basically init() and loop() are straight forward. RXinput and motors/servos outputs are handled via interrupts.
From therre, your best luck is to read the code or ask specific questions.
Most people seem to prefer the readymade firmwares for 32bit boards these days
Re: Understanding the code
Berlin_Crash_Pilot wrote:Hello everybody, I wonder a little that there is no answer to this question. Is this too much a newbee-question ? Or ist this a good kept secret that seperates men from boys ?
I am also very interested in understanding the code and would be glad for any kind of information or even a link to an information source.
Thanks guys.
i think its not so easy to to explain .. i once made a very simple quadcopter FW for the cheerson cx-10 .. its for a STM32f0, but the smallest working code i ever made, and seen
see: https://www.rcgroups.com/forums/showthr ... e-Firmware
the attachments of the first post.
regards
Felix