Reset HK MicroWii 32U4

Post Reply
Movo
Posts: 12
Joined: Sun Feb 08, 2015 1:24 pm

Reset HK MicroWii 32U4

Post by Movo »

Hi guys,
a few month ago I started this topic: http://www.multiwii.com/forum/viewtopic.php?f=8&t=6202&p=62306#p62306
I changed and uploaded the new code, but after that my board wasnt recognized by my computer so ther is probably a logical mistake in it. I bought a new board and everything was fine, but now I've acidentally seen that there is an reset pin on the original MicroWii from flyduino
Image
(Manual: http://flyduino.net/documents/microWii_Manual_Rev0r2.pdf).
I found the same pins on my HobbyKing MicroWii Image
(Manual: http://www.hobbyking.com/hobbyking/store/uploads/741171780X846863X13.pdf).
But they arent labelled. Now my question is how the pin layout is at this six pins and how I have to connect which pins in which way.
Thank you!

PatrikE
Posts: 1976
Joined: Tue Apr 12, 2011 6:35 pm
Location: Sweden
Contact:

Re: Reset HK MicroWii 32U4

Post by PatrikE »

You can see the Pinout on the first picture.
On the second You can see +5v marked as +.
Reset and gnd is closest to the edge.

To reset the board just connect RESET pin to GND quickly.

Movo
Posts: 12
Joined: Sun Feb 08, 2015 1:24 pm

Re: Reset HK MicroWii 32U4

Post by Movo »

Thank you it works now again! :D

Post Reply