baseflight configurator (win/linux/mac)

This forum is dedicated to software development related to MultiWii.
It is not the right place to submit a setup problem.
Software download
cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

baseflight configurator (win/linux/mac)

Post by cTn »

Hi guys, @fiendie recently hooked me up with stm32mini dev board, purely for development purposes, so i decided to pitch in "a little" to the community even thought i am not really using multiwii for flying.
There wasn't a multi-platform GUI for baseflight so i decided to make you guys something that's "up to the challenge" and hopefully easy enough to work with for the end user.

bc_initial_setup.png

bc_receiver.png


Installation
https://chrome.google.com/webstore/deta ... innofofigk

Source
https://github.com/multiwii/baseflight-configurator

If you like my work, buy me a new set of eye drops
Image

Enjoy :ugeek:

Changelog

Code: Select all

11.14.2013 - 0.16
- Minimum required Google Chrome / Chromium version is now 31
- Polished Firmware Flasher UI
- Bugfixes related to flashing rev5 naze boards

11.14.2013 - 0.15
- Added firmware flasher (currently supporting 2 modes)
- 1 - "local flashing", from a .hex file
- 2 - "online flashing", latest firmware is fetched from github.com

11.12.2013 - 0.14
- Re-Enabled Servos tab (hopefully with all problems sorted out)
- Added support for "Motor Testing Mode" in Motor/Servo Outputs tab
- Updated MSP
- Utilizing notification API to promote new app version updates

11.10.2013 - 0.13
- Disabling Servos tab until all bugs are ironed out
- Bugfixes

11.09.2013 - 0.12
- Bugfixes related to failing connect procedure
- Bugfixes related to GPS data types
- Implemented experimental Servos tab
- Updated MSP to the latest version
- Major MSP refactoring, improving reliability in some cases
- Initial notify implementation for critical errors
11.02.2013 - 0.11
- Debug values are now displayed and plotted in Sensor tab (dade)
- Command history in CLI tab (dade)
- Bugfixes related to GPS tab

10.30.2013 - 0.10
- AUX Configuration now shows current AUX channel state
- Polished couple of texts
- Added changelog within the app
- 3D view in Initial Setup now displays model type selected

10.16.2013 - 0.9
- Polished Auxiliary configuration tab
- Polished Raw sensod data tab
- Updated libraries
Last edited by cTn on Fri Nov 15, 2013 8:33 pm, edited 4 times in total.

fiendie
Posts: 151
Joined: Fri Apr 20, 2012 4:22 pm

Re: baseflight/multiwii configurator (win/linux/mac)

Post by fiendie »

cTn wrote:Hi guys, @fiendie recently hooked me up with stm32mini dev board, purely for development purposes, so i decided to pitch in "a little" to the community even thought i am not really using multiwii for flying.
There wasn't a multi-platform GUI for both MW and baseflight so i decided to make you guys something that's "up to the challenge" and hopefully easy enough to work with for the end user.

Enjoy :ugeek:


Great work cTn.
Thanks a lot.

User avatar
Crashpilot1000
Posts: 631
Joined: Tue Apr 03, 2012 7:38 pm

Re: baseflight/multiwii configurator (win/linux/mac)

Post by Crashpilot1000 »

@cTn: Very nice project !! The altitude graph seems a little easy to confuse, but over all, great alternative!

Cheers
Kraut Rob

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight/multiwii configurator (win/linux/mac)

Post by cTn »

Crashpilot1000 wrote:@cTn: Very nice project !! The altitude graph seems a little easy to confuse, but over all, great alternative!

Cheers
Kraut Rob

Do you have any recommendation of how would you like the altitude graph to look like? i could probably improve it if you tell me whats "wrong"

User avatar
Crashpilot1000
Posts: 631
Joined: Tue Apr 03, 2012 7:38 pm

Re: baseflight/multiwii configurator (win/linux/mac)

Post by Crashpilot1000 »

The graph looks perfect until the hight turns negative. Then the scaling is out of wack :) just a small issue. BTW: will this gui also run on those google/android tablets?

fiendie
Posts: 151
Joined: Fri Apr 20, 2012 4:22 pm

Re: baseflight/multiwii configurator (win/linux/mac)

Post by fiendie »

Crashpilot1000 wrote:BTW: will this gui also run on those google/android tablets?


Not out of the box anyway.
http://www.pocketables.com/2012/12/no-plans-for-google-chrome-on-android-and-ios-to-run-extensions-or-apps.html

Mis
Posts: 203
Joined: Fri Apr 01, 2011 12:23 am

Re: baseflight/multiwii configurator (win/linux/mac)

Post by Mis »

AUX configuration not work (display none). My MWC is custom version with some additional AUX setting, but working right with oryginal MWC GUI.

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight/multiwii configurator (win/linux/mac)

Post by cTn »

@Crashpilot1000 the baro < 0 bug should be fixed now
@Mis, show me your source, as it should be working

Mis
Posts: 203
Joined: Fri Apr 01, 2011 12:23 am

Re: baseflight/multiwii configurator (win/linux/mac)

Post by Mis »

cTn:
Ok, my MWC source: http://romek_by.republika.pl/MK/MultiWii_2_21b_MIS.zip (with my current configuration for airplane).

whakahere
Posts: 20
Joined: Wed Jan 30, 2013 9:17 pm

Re: baseflight/multiwii configurator (win/linux/mac)

Post by whakahere »

I'm having issues connecting this to a mac. The app starts but I can't connect. no new option comes up even after refreshing. I tried with bluetooth that works through multiwii and that didn't come up either. Any idea what I need to do?

monkeyman
Posts: 3
Joined: Tue Aug 06, 2013 10:51 am

Re: baseflight/multiwii configurator (win/linux/mac)

Post by monkeyman »

whakahere wrote:I'm having issues connecting this to a mac. The app starts but I can't connect. no new option comes up even after refreshing. I tried with bluetooth that works through multiwii and that didn't come up either. Any idea what I need to do?

i'm struggling with this also on a mac,
can anyone help with this? i've got some naze32 boards i want to setup but can't,

i'm pulling my hair out here, hope someone can point us in the right direction.

mopedcrosser
Posts: 52
Joined: Sat Feb 23, 2013 12:35 pm

Re: baseflight/multiwii configurator (win/linux/mac)

Post by mopedcrosser »

This is awesome ! Thanks a lot !! Hopefully we get sth. like that as standard.. The regular gui is a little ..

PS: A "Read" button is missing to get the values for PID and RC. I had to click save once to get the values.. But saving lots of 0´s is not nice...

Sebastian

patrik
Posts: 2
Joined: Sun Sep 01, 2013 9:51 am

Re: baseflight/multiwii configurator (win/linux/mac)

Post by patrik »

@monkeyman unfortunately there's a bug in Chrome (chrome.serial) that for some reason makes it unable to find the SiLabs serial port on OSX systems

luckily:
There is a workaround for this problem: you can add a symlink that Chrome will see as a valid TTY dev node. For example: 'sudo ln -s /dev/tty.SLAB_USBtoUART /dev/tty.usbserial', and now Chrome will find it.
Last edited by patrik on Wed Sep 04, 2013 1:05 pm, edited 1 time in total.

felixrising
Posts: 244
Joined: Sat Mar 23, 2013 12:34 am
Location: Australia

Re: baseflight/multiwii configurator (win/linux/mac)

Post by felixrising »

Star the hell out of that bug... get it higher priority..

monkeyman
Posts: 3
Joined: Tue Aug 06, 2013 10:51 am

Re: baseflight/multiwii configurator (win/linux/mac)

Post by monkeyman »

patrik wrote:<span>@monkeyman unfortunately there's a [url=<a href="https://code.google.com/p/chromium/issues/detail?id=230694]bug[/url]" class="smarterwiki-linkify">https://code.google.com/p/chromium/issues/detail?id=230694]bug[/url]</a> in Chrome (chrome.serial) that for some reason makes it unable to find the SiLabs serial port on OSX systems</span>

luckily:
There is a workaround for this problem: you can add a symlink that Chrome will see as a valid TTY dev node. For example: 'sudo ln -s /dev/tty.SLAB_USBtoUART /dev/tty.usbserial', and now Chrome will find it.

Hi Patrik,
is it possible can you give me a quick rundown on how to implement this workaround? i've had a look through various pages but am at a loss as how to get this up and running.
many thanks.

crashlander
Posts: 506
Joined: Thu May 05, 2011 8:13 am
Location: Slovenia

Re: baseflight/multiwii configurator (win/linux/mac)

Post by crashlander »

sudo ln -s /dev/tty.SLAB_USBtoUART /dev/tty.usbserial

That is the complete rundown of workaround!
You just copy-paste that line into open Terminal.app window, while SILabs usb2serial port/dongle/converter is connected, and press enter. Respond with your login password when asked (it will not echo on screen).

Regards
Andrej

BTW: If you have some other (non SiLab's) USB2SERIAL converter you must change that part after first "tty." accordingly, you can get real name in original MWII GUI when selecting serial port.

monkeyman
Posts: 3
Joined: Tue Aug 06, 2013 10:51 am

Re: baseflight/multiwii configurator (win/linux/mac)

Post by monkeyman »

crashlander wrote:
sudo ln -s /dev/tty.SLAB_USBtoUART /dev/tty.usbserial

That is the complete rundown of workaround!
You just copy-paste that line into open Terminal.app window, while SILabs usb2serial port/dongle/converter is connected, and press enter. Respond with your login password when asked (it will not echo on screen).

Regards
Andrej

BTW: If you have some other (non SiLab's) USB2SERIAL converter you must change that part after first "tty." accordingly, you can get real name in original MWII GUI when selecting serial port.

this is the part i was after ;), where to stick the code, thanks for your help patrik and crashlander :D :D :D

i hope whakahere sees this.

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight configurator (win/linux/mac)

Post by cTn »

configurator received some major updates in the past couple of days, i suggest current users or even new users have a look on the latest version

scrat
Posts: 925
Joined: Mon Oct 15, 2012 9:47 am
Location: Slovenia

Re: baseflight configurator (win/linux/mac)

Post by scrat »

Thanks Andrej :)

felixrising
Posts: 244
Joined: Sat Mar 23, 2013 12:34 am
Location: Australia

Re: baseflight configurator (win/linux/mac)

Post by felixrising »

That's a great new feature. A major step up that turns it into a one stop baseflight shop. Very cool.

scrat
Posts: 925
Joined: Mon Oct 15, 2012 9:47 am
Location: Slovenia

Re: baseflight configurator (win/linux/mac)

Post by scrat »

cTn wrote:
Changelog
11.14.2013 - 0.15
- Added firmware flasher (currently supporting 2 modes)
- 1 - "local flashing", from a .hex file
- 2 - "online flashing", latest firmware is fetched from github.com

11.12.2013 - 0.14
- Re-Enabled Servos tab (hopefully with all problems sorted out)
- Added support for "Motor Testing Mode" in Motor/Servo Outputs tab
- Updated MSP
- Utilizing notification API to promote new app version updates

11.10.2013 - 0.13
- Disabling Servos tab until all bugs are ironed out
- Bugfixes

11.09.2013 - 0.12
- Bugfixes related to failing connect procedure
- Bugfixes related to GPS data types
- Implemented experimental Servos tab
- Updated MSP to the latest version
- Major MSP refactoring, improving reliability in some cases
- Initial notify implementation for critical errors
11.02.2013 - 0.11
- Debug values are now displayed and plotted in Sensor tab (dade)
- Command history in CLI tab (dade)
- Bugfixes related to GPS tab

10.30.2013 - 0.10
- AUX Configuration now shows current AUX channel state
- Polished couple of texts
- Added changelog within the app
- 3D view in Initial Setup now displays model type selected

10.16.2013 - 0.9
- Polished Auxiliary configuration tab
- Polished Raw sensod data tab
- Updated libraries


When will be version 0.15 available? I have 0.14 no upgrade option?

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight configurator (win/linux/mac)

Post by cTn »

chrome should auto update it for you, if it doesn't you can do it manually through tools -> extensions -> update extensions button
you should also make sure you are running the latest chrome by going into the about page

scrat
Posts: 925
Joined: Mon Oct 15, 2012 9:47 am
Location: Slovenia

Re: baseflight configurator (win/linux/mac)

Post by scrat »

cTn wrote:chrome should auto update it for you, if it doesn't you can do it manually through tools -> extensions -> update extensions button
you should also make sure you are running the latest chrome by going into the about page


Thanks. It's working :)

--Oz--
Posts: 25
Joined: Tue Jan 07, 2014 6:11 pm

Re: baseflight configurator (win/linux/mac)

Post by --Oz-- »

Does this work with blue tooth? (winXp or Win7 notebook) TIA
Last edited by --Oz-- on Wed Feb 05, 2014 1:15 am, edited 1 time in total.

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight configurator (win/linux/mac)

Post by cTn »

--Oz-- wrote:Does this work with blue tooth? (winXp or Win7 notebook) TIA

if you can configure the bluetooth module to use the same baud rate as baseflight, then yes it should work (depends mostly on the bluetooth unit though)

--Oz--
Posts: 25
Joined: Tue Jan 07, 2014 6:11 pm

Re: baseflight configurator (win/linux/mac)

Post by --Oz-- »

cTn wrote:
--Oz-- wrote:Does this work with blue tooth? (winXp or Win7 notebook) TIA

if you can configure the bluetooth module to use the same baud rate as baseflight, then yes it should work (depends mostly on the bluetooth unit though)


Thanks for the reply.

My BT dongle does not show a com port after plugging in (in device manager it is under "Blue tooth Radios" in Win7).

Any other baseflight configurators that work in windows using bluetooth? TIA

timecop
Posts: 1880
Joined: Fri Sep 02, 2011 4:48 pm

Re: baseflight configurator (win/linux/mac)

Post by timecop »

...
Then the problem is your fucking dongle, not the configurator.

--Oz--
Posts: 25
Joined: Tue Jan 07, 2014 6:11 pm

Re: baseflight configurator (win/linux/mac)

Post by --Oz-- »

We pretty much know it doesn't work, so;

Any other baseflight configurators that work in windows using bluetooth?

felixrising
Posts: 244
Joined: Sat Mar 23, 2013 12:34 am
Location: Australia

Re: baseflight configurator (win/linux/mac)

Post by felixrising »

Baseflight Configurator works just fine over a bluetooth ttl dongle. Both Win7 and OS X

--Oz--
Posts: 25
Joined: Tue Jan 07, 2014 6:11 pm

Re: baseflight configurator (win/linux/mac)

Post by --Oz-- »

felixrising wrote:Baseflight Configurator works just fine over a bluetooth ttl dongle. Both Win7 and OS X


TY!

felixrising
Posts: 244
Joined: Sat Mar 23, 2013 12:34 am
Location: Australia

Re: baseflight configurator (win/linux/mac)

Post by felixrising »

If it doesn't show up as a COM port, then you have either a driver issue with your bluetooth dongle or the serial bluetooth module isn't working/not paired or any one of a number of other issues. Generally they either work or they don't after being paired. You can interrogate the paired device and see what profiles/services are made available.. serial must be one of them. It might help to specify exactly what bluetooth ttl module you have.

iamhandgun
Posts: 8
Joined: Thu May 30, 2013 7:23 am

Re: baseflight configurator (win/linux/mac)

Post by iamhandgun »

I found this thread because I couldn't get my board to show up in the configurator on osx. I did the terminal work around and now an option for usb serial shows up but it still won't connect when selected. It shows up and connects in the multiwii gui just fine. I have the rev4 white naze32 with latest chrome on osx 10.6.8 . Any clue as to what I'm doing wrong?

User avatar
QAV400
Posts: 75
Joined: Mon Oct 21, 2013 4:41 am

Re: baseflight configurator (win/linux/mac)

Post by QAV400 »

Since the update to the Application a couple of days ago I can not get it to see the board/Commports at all. Was working perfect before that tho.

Also it all works if i use Multiwiiconf.exe So I assume something is up with the latest update and my specific hardware.

Im on a Rev4 acro naze32 on baseflight firmware dated 26-11-13
https://code.google.com/p/afrodevices/d ... p&can=2&q=

Any help?

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight configurator (win/linux/mac)

Post by cTn »

Have you tried flashing the board with the latest firware? as there was some protocol changes that was made a while back, which could break compatibility

User avatar
QAV400
Posts: 75
Joined: Mon Oct 21, 2013 4:41 am

Re: baseflight configurator (win/linux/mac)

Post by QAV400 »

I just removed the App and re instlled it in chrome, now its working , but when clicking on the tabs between reciever , Pids etc it freezes up and you have to click on them and back again heaps etc to get the tab to show up.

Is there a newer baseflight firmware that is proven tested and solid working? if so i have not been sure of where to find it, could you maybe help me in link or something pls :)

cheers

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight configurator (win/linux/mac)

Post by cTn »

everyone that i know usually runs the latest version compiled/published on github, the easiest way to get it is to enrer firmware flasher and load online firmware from there

felixrising
Posts: 244
Joined: Sat Mar 23, 2013 12:34 am
Location: Australia

Re: baseflight configurator (win/linux/mac)

Post by felixrising »

QAV400. Baseflight is tested by its users... if you spot anything, feel free to log a issue on github or drop by #multiwii to provide some constructive feedback. The latest version of baseflight .hex is available on github or as cTn mentioned, you can just use the firmware flasher built into Baseflight Configurator.
https://github.com/multiwii/baseflight

User avatar
stronnag
Posts: 114
Joined: Thu Oct 24, 2013 9:32 pm
Location: New Forest, England
Contact:

Re: baseflight configurator (win/linux/mac)

Post by stronnag »

The latest version (0.25) no longer works for me, on either USB for Bluetooth. After opening the serial port, it hangs for several seconds before successfully closing the port. Other MSP tools, such as mwp and MultiWiiConf work fine. Earlier versions of baseflight also worked (excellently).

21:01:49 -- Running - OS: Linux, Chrome: 33.0.1750.117, Configurator: 0.25
21:01:55 -- Serial port successfully opened with ID: 5
21:02:05 -- No configuration received within 10 seconds, communication failed
21:02:05 -- Serial port successfully closed

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight configurator (win/linux/mac)

Post by cTn »

stronnag wrote:The latest version (0.25) no longer works for me, on either USB for Bluetooth. After opening the serial port, it hangs for several seconds before successfully closing the port. Other MSP tools, such as mwp and MultiWiiConf work fine. Earlier versions of baseflight also worked (excellently).

21:01:49 -- Running - OS: Linux, Chrome: 33.0.1750.117, Configurator: 0.25
21:01:55 -- Serial port successfully opened with ID: 5
21:02:05 -- No configuration received within 10 seconds, communication failed
21:02:05 -- Serial port successfully closed


on which revision of naze do you have this problem ?
+ i am guessing you already run the latest firmware from github

User avatar
stronnag
Posts: 114
Joined: Thu Oct 24, 2013 9:32 pm
Location: New Forest, England
Contact:

Re: baseflight configurator (win/linux/mac)

Post by stronnag »

cTn wrote:
stronnag wrote:The latest version (0.25) no longer works for me, on either USB for Bluetooth. After opening the serial port, it hangs for several seconds before successfully closing the port. Other MSP tools, such as mwp and MultiWiiConf work fine. Earlier versions of baseflight also worked (excellently).

21:01:49 -- Running - OS: Linux, Chrome: 33.0.1750.117, Configurator: 0.25
21:01:55 -- Serial port successfully opened with ID: 5
21:02:05 -- No configuration received within 10 seconds, communication failed
21:02:05 -- Serial port successfully closed


on which revision of naze do you have this problem ?
+ i am guessing you already run the latest firmware from github


Apologies, for not stating previously; this is not naze, it's multiwii FC, (MW 2.3) which has worked well previously. In the case that baseflight now only supports naze, mea culpa, and perfectly understandable.

User avatar
QAV400
Posts: 75
Joined: Mon Oct 21, 2013 4:41 am

Re: baseflight configurator (win/linux/mac)

Post by QAV400 »

cTn wrote:everyone that i know usually runs the latest version compiled/published on github, the easiest way to get it is to enrer firmware flasher and load online firmware from there


As my Quad is worth a bit to me I will just use multiwiiconf.exe from now on as I dont want to really risk running always the latest firmware etc.. Once it flys how i like and im happy with it I dont want to have to change anything if its not needed.

thanks anyways.

LVNeptune
Posts: 19
Joined: Mon Jan 20, 2014 10:54 pm

Re: baseflight configurator (win/linux/mac)

Post by LVNeptune »

Your statement makes no sense...Baseflight Config doesn't FORCE you to upgrade, it's an option you have to select yourself... Stating you aren't going to use this because you don't want to update the firmware makes zero sense.

User avatar
QAV400
Posts: 75
Joined: Mon Oct 21, 2013 4:41 am

Re: baseflight configurator (win/linux/mac)

Post by QAV400 »

Well a couple of times with my naze32 rev4 board the Baseflight chrome App has been working fine then the app updates it self and then I have issues with either jargon on the cli page or pages not loading or comm ports not even there at all to connect to and when i have updated the firmware on the board it has fixed the issues and since I could not figure out a way for the chrome app to stop updating itself it appeared i was in a sort of forced upgrade loop.

Just so you know its cool I am not upset or anything like that, I will just use that multiwiiconf.exe , as that is seeming to work and i dont think that will update itself, but im not 100% sure
:)

cheers

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight configurator (win/linux/mac)

Post by cTn »

in worst case scenario you can always use tagged releases that i have on github, as those won't auto update, however this wont help you much at the moment as there have been major changes in serial api and the "incompatible" brak was expected.

Regarding the non-naze hardware, support for anything else but naze was in the configurator for a while, there is a slim chance that this condition will be loosen up when i run more tests on generic mw hardware, but don't hold your breath on that one

LVNeptune
Posts: 19
Joined: Mon Jan 20, 2014 10:54 pm

Re: baseflight configurator (win/linux/mac)

Post by LVNeptune »

I see what you were referring too...The newer version of Baseflight Config was semi-broken with the current firmwares. On top of that my Baseflight Config wouldn't detect COM port AT ALL until I upgraded. I didn't even know there was an upgrade until someone on IRC pointed it out.

tanman
Posts: 9
Joined: Sun Jul 22, 2012 2:16 am

baseflight configurator (win/linux/mac)

Post by tanman »

Is it normal not to have the compass dial on the initial setup page?

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight configurator (win/linux/mac)

Post by cTn »

tanman wrote:Is it normal not to have the compass dial on the initial setup page?

yes its normal, it was removed due to lack of space for the initial tab options

tanman
Posts: 9
Joined: Sun Jul 22, 2012 2:16 am

baseflight configurator (win/linux/mac)

Post by tanman »

cTn wrote:
tanman wrote:Is it normal not to have the compass dial on the initial setup page?

yes its normal, it was removed due to lack of space for the initial tab options

Thanks for much

BlackRock
Posts: 10
Joined: Mon Jan 27, 2014 2:40 am

Re: baseflight configurator (win/linux/mac)

Post by BlackRock »

So has anyone got a fix for the "new serial API fails to set higher baudrate then 38400" issue? I had my Naze32 all setup and then while waiting for RC parts to come in Chrome or Mac updated and now the app is completely broken. I've since reinstalled Chrome and Base Flight Configurator which pointed me to a convoluted thread on versioning and bugs, but no solution.

I upgraded the app to Configurator: 0.26, I'm running Mac OSX 10.9.2 and Chrome: 33.0.1750.117. I had the same problem on Mac OSX 10.9.1 as well.

Every time I open the app I get the following lines in the log window:
21:28:19 -- Running - OS: MacOS, Chrome: 33.0.1750.117, Configurator: 0.26
21:28:19 -- Configurator detected that you are running Chrome / Chromium with broken Serial API which breaks the communication completely on this platform
21:28:19 -- You can find more about this issue on this address "new serial API fails to set higher baudrate then 38400"

So now I'm completely stuck. I can't get it to connect or flash my Naze32. Is there a way to downgrade to previously stable versions? Is this still only a problem in Mac but fixed on other machines? I see that in version notes that in .25 it's running the new serial API for Chrome 33+.

I must be missing something. Either way I'm going nuts. My motors just came in and if I'm not flying by this weekend I'm pretty sure my head will explode ;)

cTn
Posts: 23
Joined: Sat Apr 13, 2013 12:03 pm

Re: baseflight configurator (win/linux/mac)

Post by cTn »

BlackRock wrote:So has anyone got a fix for the "new serial API fails to set higher baudrate then 38400" issue? I had my Naze32 all setup and then while waiting for RC parts to come in Chrome or Mac updated and now the app is completely broken. I've since reinstalled Chrome and Base Flight Configurator which pointed me to a convoluted thread on versioning and bugs, but no solution.

I upgraded the app to Configurator: 0.26, I'm running Mac OSX 10.9.2 and Chrome: 33.0.1750.117. I had the same problem on Mac OSX 10.9.1 as well.

Every time I open the app I get the following lines in the log window:
21:28:19 -- Running - OS: MacOS, Chrome: 33.0.1750.117, Configurator: 0.26
21:28:19 -- Configurator detected that you are running Chrome / Chromium with broken Serial API which breaks the communication completely on this platform
21:28:19 -- You can find more about this issue on this address "new serial API fails to set higher baudrate then 38400"

So now I'm completely stuck. I can't get it to connect or flash my Naze32. Is there a way to downgrade to previously stable versions? Is this still only a problem in Mac but fixed on other machines? I see that in version notes that in .25 it's running the new serial API for Chrome 33+.

I must be missing something. Either way I'm going nuts. My motors just came in and if I'm not flying by this weekend I'm pretty sure my head will explode ;)


That message is obsolete now, i just forgot to remove it, configurator works just fine on OSX & 33.0.1750.117

Post Reply