Win7 64Bit GUI Problem !
Win7 64Bit GUI Problem !
Hallo,
I have a Windows7 64Bit system.
When I start the Wii-GUI a white window appears and that’s it
The Board is powered on and connected.
The source code is still on the microcontroller.
The Connection between the controller and the arduino-tool works fine.
So is there anyone who can help me ?
Is the 64Bit system the Problem ?
I tried the v7 and v8 from the GUI, it’s the same problem in both versions.
I have a Windows7 64Bit system.
When I start the Wii-GUI a white window appears and that’s it
The Board is powered on and connected.
The source code is still on the microcontroller.
The Connection between the controller and the arduino-tool works fine.
So is there anyone who can help me ?
Is the 64Bit system the Problem ?
I tried the v7 and v8 from the GUI, it’s the same problem in both versions.
Re: Win7 64Bit GUI Problem !
I'm using x64 Windows 7 with no problems.
Make sure your Java RE is up to date.
Disconnect your multiwii from your computer and run the GUI and see if it starts.
Make sure your Java RE is up to date.
Disconnect your multiwii from your computer and run the GUI and see if it starts.
Re: Win7 64Bit GUI Problem !
Hi,
If you start GUI x86 version then you need to install java 32 bit version on your 64 bit.
If you start GUI x64 version then you need to install java 64 bit version on your 64 bit.
that's all,
Same on linux, as the java code have depends on some system library, you need those library for 64 or 32 bit depend on your java and GUI
Fabrice,
If you start GUI x86 version then you need to install java 32 bit version on your 64 bit.
If you start GUI x64 version then you need to install java 64 bit version on your 64 bit.
that's all,
Same on linux, as the java code have depends on some system library, you need those library for 64 or 32 bit depend on your java and GUI
Fabrice,
Re: Win7 64Bit GUI Problem !
Ok I have tried to install Java again.
When I install Java x64 (6u27) I get the Error “couldn’t find javaw.exe”
So I reinstall Java x86 (6u27).
Now I don’t get this Err but I still have the same Problem like before.
Processing starts and opens a white window.
And it doesn’t meter if the board is connected or not
When I install Java x64 (6u27) I get the Error “couldn’t find javaw.exe”
So I reinstall Java x86 (6u27).
Now I don’t get this Err but I still have the same Problem like before.
Processing starts and opens a white window.
And it doesn’t meter if the board is connected or not
Re: Win7 64Bit GUI Problem !
If you have Bluetooth in your computer the Gui can hang when it's looking for serialports.
I have to disable BT when i start the Gui.
I have to disable BT when i start the Gui.
Re: Win7 64Bit GUI Problem !
No there is no BT.
- jevermeister
- Posts: 708
- Joined: Wed Jul 20, 2011 8:56 am
- Contact:
Re: Win7 64Bit GUI Problem !
The starting of my GUI also needs a long time since i installed my Bluetooth serial ports:
I connected the flyduino via FTDI2USB adapter and in the process of starting the GUI the buzzer buzzes a few times (the same code that indicates a completed gyro init) how can I change this? since I do not need the bluetoooth connectivity on my PC anymore...
Nils
I connected the flyduino via FTDI2USB adapter and in the process of starting the GUI the buzzer buzzes a few times (the same code that indicates a completed gyro init) how can I change this? since I do not need the bluetoooth connectivity on my PC anymore...
Nils
Re: Win7 64Bit GUI Problem !
Hi Nils.
RightClick on BT icon next to the clock.
Select Deactivate Bluetooth in the menu.
The icon will be blue and red when it's Deactivated.
/Patrik
RightClick on BT icon next to the clock.
Select Deactivate Bluetooth in the menu.
The icon will be blue and red when it's Deactivated.
/Patrik
Re: Win7 64Bit GUI Problem !
Is there a way to start the GUI over a Program with a debugger or a console?
Maybe I can see where the program stops
Maybe I can see where the program stops
Re: Win7 64Bit GUI Problem !
you can run the .pde flie with Processing.
Check the guide.
http://www.multiwii.com/forum/viewtopic.php?f=18&t=190
Check the guide.
http://www.multiwii.com/forum/viewtopic.php?f=18&t=190
Re: Win7 64Bit GUI Problem !
If I follow this manual and run the GUI with processing, everything works fine.
But when I Try to generate a .exe I get the error message:
He only creates two folders (for win x86 and x64).
But when I run this .exe I have the same problem like befor with the white window.
But when I Try to generate a .exe I get the error message:
Could not copy source file: C:\Users\xxx\AppData\Local\Temp\MultiWiiConf1_84647218483702447343temp\MultiWiiConf1_8.java
He only creates two folders (for win x86 and x64).
But when I run this .exe I have the same problem like befor with the white window.
Re: Win7 64Bit GUI Problem !
I had similar problem. So I tried it with my friend's computer who also runs Windows 7 64 bit and it works on his!
You need to properly uninstall the old Java and choose the proper Java that matchs your internet surfer which is most likely the 32 bit if you use IE.
You need to properly uninstall the old Java and choose the proper Java that matchs your internet surfer which is most likely the 32 bit if you use IE.
Re: Win7 64Bit GUI Problem !
I've already tried to reinstall.
Ok I have tried to install Java again.
When I install Java x64 (6u27) I get the Error “couldn’t find javaw.exe”
So I reinstall Java x86 (6u27).
Now I don’t get this Err but I still have the same Problem like before.
Processing starts and opens a white window.
And it doesn’t meter if the board is connected or not
Re: Win7 64Bit GUI Problem !
Ok for those have problem with the last version of JAVA
(on my 3 computer gui don't want's to start)
Go in your "program file (x86)" folder and find "java"
Copy :
"java.exe"
"javaw.exe"
"javaws.exe"
Put them in your gui folder...and it works...
Ok I know it's a dirty solution but working for me
(on my 3 computer gui don't want's to start)
Go in your "program file (x86)" folder and find "java"
Copy :
"java.exe"
"javaw.exe"
"javaws.exe"
Put them in your gui folder...and it works...
Ok I know it's a dirty solution but working for me
Re: Win7 64Bit GUI Problem !
From MWOSD FAQ if it helps anyone (also uses processing/java app). Credit to Zagnetsu57 for making me aware of it :
#20 I get unspecified Java or Java patrch error. How do I fix it.
There are many type of Java error. One of the more common ones has a solution in the video below:
https://www.youtube.com/watch?v=66crhKstr70
#20 I get unspecified Java or Java patrch error. How do I fix it.
There are many type of Java error. One of the more common ones has a solution in the video below:
https://www.youtube.com/watch?v=66crhKstr70