Hi,
here is a "other" Android BT Tool.
- It includes PID Modifying
- Save and Load PID-Settings into a file.
- Protocol for V1.7 and V1.8 (dev).
- Modifying Switch and Modes
- HUD
- Calibration ACC/MAG
- Graphic for Sensor's
Ok, the Parser is based on foomatic's Android PID tool. Thanks for that. See here
http://wbb.multiwii.com/viewtopic.php?f=8&t=248
The HUD is from Bart. See here
http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost%3A424141
And of course some info's from the internet .
Here some Screenshoot's. If anybody want the Source code, please send me e-mail.
It's to big to attach here.
It's a beta Version. Please be carefully.
Android MultiWii GCS bluetooth
Android MultiWii GCS bluetooth
- Attachments
-
- snap20110721_113743.png
- (8.33 KiB) Not downloaded yet
-
- snap20110721_113759.png
- (10.07 KiB) Not downloaded yet
-
- AndMultiWii.zip
- (189.03 KiB) Downloaded 289 times
-
- Posts: 19
- Joined: Fri Jun 17, 2011 10:08 am
Re: Android MultiWii GCS bluetooth
This tool is great!
Especially the feature to save PID-Settings with a short description to the sd-card is perfect!
Thank you!
Especially the feature to save PID-Settings with a short description to the sd-card is perfect!
Thank you!
Re: Android MultiWii GCS bluetooth
Great app Sandman!
I used the previous version and missed the modes...now it's ok!! And it's flawless for me. Never had a problem /crash...
The autoscaling in the graph is really good, great job!
I used the previous version and missed the modes...now it's ok!! And it's flawless for me. Never had a problem /crash...
The autoscaling in the graph is really good, great job!
Re: Android MultiWii GCS bluetooth
Great tool.
But i miss the Calibrate ACC button.
/Patrik
But i miss the Calibrate ACC button.
/Patrik
Re: Android MultiWii GCS bluetooth
If you connected to a Device,
you can make a long click on the Device, there is a calibration button.
you can make a long click on the Device, there is a calibration button.
Re: Android MultiWii GCS bluetooth
Ok.
You could add a manage button when it's connected.
Its more natural.
I also found a bug in hud.
Acc for nick shows invertet movements.
if it dives more sky is shown and pichup the ground shows..
Roll is correct.
Otherwise i good tool.
/Patrik
You could add a manage button when it's connected.
Its more natural.
I also found a bug in hud.
Acc for nick shows invertet movements.
if it dives more sky is shown and pichup the ground shows..
Roll is correct.
Otherwise i good tool.
/Patrik
- jevermeister
- Posts: 708
- Joined: Wed Jul 20, 2011 8:56 am
- Contact:
Re: Android MultiWii GCS bluetooth
Hi,
I tried this Tool without a Bluetooth Module just for testing the interface but it crashes:
"Die Anwendung wurde unerwartet beendet"
I can see "No active Connections" at the top bar.
Is it normal behavior without a bluetooth module?
Nils
I tried this Tool without a Bluetooth Module just for testing the interface but it crashes:
"Die Anwendung wurde unerwartet beendet"
I can see "No active Connections" at the top bar.
Is it normal behavior without a bluetooth module?
Nils
Re: Android MultiWii GCS bluetooth
It's probably an errorhandler missing.
Usual during development.
Usual during development.
Re: Android MultiWii GCS bluetooth
Hi,
Any way to correct the inverted pitch on HUD???
Great soft, Thanks in advance!!
Any way to correct the inverted pitch on HUD???
Great soft, Thanks in advance!!