Hi,
I have this GPS http://www.drotek.fr/shop/en/88-i2c-pa6c-gps-llc.html
where is the right metod to upload the new code on the atmega on board?
http://code.google.com/p/i2c-gps-nav/downloads/list
I try with FTDI port but arduino get this error: avrdude: stk500_getsync () : not in sync resp=0x00
help me please
I2C GPS Upgrade firmware
-
- Posts: 2
- Joined: Sat Aug 18, 2012 3:32 pm
- Location: Cologne
Re: I2C GPS Upgrade firmware
try to desolder the power-pins on the downside.
now should only the green led blink....
enable
#define NMEA
and upload the code....
now solder the power-pins on the downside and connect like usual
now should only the green led blink....
enable
#define NMEA
and upload the code....
now solder the power-pins on the downside and connect like usual