See patch:
https://github.com/wertarbyte/multiwii- ... 9a11d5a174
[Patch] Indicate state of CAMSTAB/CAMTRIG in GUI
Re: [Patch] Indicate state of CAMSTAB/CAMTRIG in GUI
Am I the only one using CAMTRIG/CAMSTAB?
Re: [Patch] Indicate state of CAMSTAB/CAMTRIG in GUI
camstab/camtrigger have direct visual feedback when tested on the ground .. when i am flying i do not use the gui.
Re: [Patch] Indicate state of CAMSTAB/CAMTRIG in GUI
Not e.g. if you are debugging your gimbal system - and it's also an inconsistency, since every other boxitem indicates its activation in the GUI. I cannot find a reason for not applying this simple one line patch.
Re: [Patch] Indicate state of CAMSTAB/CAMTRIG in GUI
Tommie wrote:Not e.g. if you are debugging your gimbal system - and it's also an inconsistency, since every other boxitem indicates its activation in the GUI. I cannot find a reason for not applying this simple one line patch.
what is the benefit ?
having no reason to not do something does not mean it is useful.
i am not against your proposal , i fact i do not care unless the serial protocol is changed before release 2.1
please read this ->
http://manohars.files.wordpress.com/2009/11/97-things-every-software-architect-should-know.pdf
Re: [Patch] Indicate state of CAMSTAB/CAMTRIG in GUI
The benefit is seeing whether the switch actually enables the gimbal or camera - so it behaves like any other thing you can switch.
And it's not even changing the protocol, it's just simply plugging a "hole" in the bitmask transmitted; instead of being stuck at 0, the bits will now actually indicate something.
And it's not even changing the protocol, it's just simply plugging a "hole" in the bitmask transmitted; instead of being stuck at 0, the bits will now actually indicate something.
Re: [Patch] Indicate state of CAMSTAB/CAMTRIG in GUI
..and yes , i did not read you patch, making wrong assumption