Hi all, the little metal bit that attaches the rotor to the motor broke and I have had a hard time finding a replacement part. I was wondering if these have a name I might be unaware of and if anyone has a recommendation on where to get them.
The original quad is here:
http://www.goodluckbuy.com/butterfly-x2 ... mbled.html
It was actually bought on eBay, but it's the same exact product.
Thanks,
Alex
Motor/Rotor Adapter
-
- Posts: 92
- Joined: Thu Dec 01, 2011 8:55 pm
- Location: Scotter, Lincolnshire, UK
Re: Motor/Rotor Adapter
Depending on what your shaft diameter is you need the following:
http://www.goodluckbuy.com/4-mm-plane-fixed-pitch-propeller-adapter-shaft-bullet-typey-4-pack.html
You can get these on ebay and from most model shops.
Either measure the diameter of the motor shaft, or has your motors got a model number listed on them?
Iain
http://www.goodluckbuy.com/4-mm-plane-fixed-pitch-propeller-adapter-shaft-bullet-typey-4-pack.html
You can get these on ebay and from most model shops.
Either measure the diameter of the motor shaft, or has your motors got a model number listed on them?
Iain
Re: Motor/Rotor Adapter
refractions wrote:Depending on what your shaft diameter is you need the following:
http://www.goodluckbuy.com/4-mm-plane-fixed-pitch-propeller-adapter-shaft-bullet-typey-4-pack.html
You can get these on ebay and from most model shops.
Either measure the diameter of the motor shaft, or has your motors got a model number listed on them?
Iain
Now, is the 4 mm the diameter of the motor shaft, or the diameter of the propeller shaft?
My motors are these: XXD 2200KV 1510 brushless motor
Just measuring inaccurately with a ruler I'd say they are approx 1.5 mm diameter.
My propellers are these: http://www.goodluckbuy.com/gws-5030-503 ... -pack.html
They are approx 3 mm diameter.
Thanks,
Alex
-
- Posts: 92
- Joined: Thu Dec 01, 2011 8:55 pm
- Location: Scotter, Lincolnshire, UK
Re: Motor/Rotor Adapter
Hi, if your props are 3mm - then your motor shafts should be 3mm
3mm on ebay -
http://www.ebay.co.uk/itm/5-x-3-mm-RC-Aluminum-Bullet-Propeller-Adapter-Holder-for-Brushless-Motor-Prop-/170749164496?pt=UK_ToysGames_RadioControlled_JN&hash=item27c1717bd0
Iain
3mm on ebay -
http://www.ebay.co.uk/itm/5-x-3-mm-RC-Aluminum-Bullet-Propeller-Adapter-Holder-for-Brushless-Motor-Prop-/170749164496?pt=UK_ToysGames_RadioControlled_JN&hash=item27c1717bd0
Iain
-
- Posts: 92
- Joined: Thu Dec 01, 2011 8:55 pm
- Location: Scotter, Lincolnshire, UK
Re: Motor/Rotor Adapter
Just checked the specs for your motor - apparantly they are 2mm shafts.
2mm prop adapters ebay.
http://www.ebay.com/itm/5-x-2-mm-RC-Aluminum-Bullet-Propeller-Adapter-Holder-for-Brushless-Motor-Prop-/170748517110?pt=Radio_Control_Parts_Accessories&hash=item27c1679af6
Iain
2mm prop adapters ebay.
http://www.ebay.com/itm/5-x-2-mm-RC-Aluminum-Bullet-Propeller-Adapter-Holder-for-Brushless-Motor-Prop-/170748517110?pt=Radio_Control_Parts_Accessories&hash=item27c1679af6
Iain