My first flights

Post Reply
BeringBullet
Posts: 27
Joined: Tue Nov 13, 2012 10:02 pm

My first flights

Post by BeringBullet »

it was to windy to tune the PID's but we had some good first flights/crashes and my first FPV flight
here are my first videos

http://www.youtube.com/playlist?list=PL ... lNUukB4ccR

tovrin
Posts: 705
Joined: Tue Sep 20, 2011 4:08 pm

Re: My first flights

Post by tovrin »

well done, looks like you got some prop balancing or PID adjustments to make, the constant wobble can be corrected.

BeringBullet
Posts: 27
Joined: Tue Nov 13, 2012 10:02 pm

Re: My first flights

Post by BeringBullet »

ya I was going to turn the PID's but it was to windy so we just went for it. you can see one boom on the left just bouncing around I am assuming that's a balancing problem

tovrin
Posts: 705
Joined: Tue Sep 20, 2011 4:08 pm

Re: My first flights

Post by tovrin »

get a vibration tool for your android, kill power to all but one motor and power it up, watch how much vibration makes it to the center plate and correct! balancing props will do a lot, but you can also check the balance of your motor bell-housings and make sure your FC has proper dampening (i use foam padding at each screw and under my FC)

BeringBullet
Posts: 27
Joined: Tue Nov 13, 2012 10:02 pm

Re: My first flights

Post by BeringBullet »

Is there a way in the multiwii UI to only have it power on motor at a time?

tovrin
Posts: 705
Joined: Tue Sep 20, 2011 4:08 pm

Re: My first flights

Post by tovrin »

there is, but i dont know how to do it.

Post Reply