Page 1 of 1

MegapirateNG on Multiwii EZ pro 3

PostPosted: Sun Jun 25, 2017 7:41 am
by flygone
Hi alls,
Can you tell me if it is possible to use MegapirateNG on Multiwii EZ Pro3 ? (not Blacked edition, mine has Compas)
http://www.readytoflyquads.com/multiwii-pro-ez3-0-flight-controller-w-gps-option
Thank you.

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Sun Jun 25, 2017 5:13 pm
by Kbev5709
It would probably work but it would be a downgrade from the latest multiwii release.

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Sun Jun 25, 2017 6:24 pm
by flygone
Hi, you have raison, if I do update by mission planner, system not respond.....
If I load with flash tool, it's ok.
So I have just a problem to configure my serial gps, I don't know witch port use ?

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Mon Jun 26, 2017 9:48 pm
by flygone
Hi Kbev, can you explain me why MW ez pro3 don't support the last firmware ?
Thank you

My gps,is,ok now :D

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Wed Jun 28, 2017 8:31 pm
by Kbev5709
I have that fc and 2.4 works great on it.

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Wed Jun 28, 2017 10:00 pm
by flygone
So, is it possible to load this firmware directly by Mission planner ????
And where do you find this version ?
All the best..

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Thu Jun 29, 2017 1:17 am
by Kbev5709
Just download version 2.4 and install it using the Arduino IDE. Mission planner is for creating gps missions, not for updating firmware.

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Thu Jun 29, 2017 11:59 am
by flygone
Ok with Arduino, but in Mission planer there this possibility, but impossible to selected versions. (same in windows)
Capture d’écran 2017-06-29 à 12.56.35.png

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Thu Jun 29, 2017 4:53 pm
by Kbev5709
Mission planner is for arducopter, not multiwii.

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Thu Jun 29, 2017 7:45 pm
by flygone
yes, but arducopter or multiwii are based on same Atemga 2560, I don' understand the subtleties...

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Fri Jun 30, 2017 12:46 am
by Kbev5709
It's pretty simple. Arducopter and Multiwii are two different firmwares that can run on the same hardware. Not interchangable as they are two separate development platforms. Use one firmware or the other.
They do NOT work together.

Re: MegapirateNG on Multiwii EZ pro 3

PostPosted: Fri Jun 30, 2017 6:26 am
by flygone
Hi kbev
Arducopter and Multiwii are two different firmwares that can run on the same hardware.

I agree with you, that's why I do not understand why the installations of the last firmware from mission planner does not work.
Actually, I must install old firm via Flashtool or IDE Arduino and it's OK to conned mission planner.