Hi,
I am quite new to this but now ungrade to 1.8 for my Y6 which I only have for a few weeks. The GUI display the Y6 graphic with GREEN arrow pointing to the wrong direction! It is opposite to where it should be. But the ROLL and PITCH animation are correct. It was correct in my 1.7 version.
It flies okay though.
Any suggestion will be appreciated.
Tanasit
In the picture above, the arrow supposes to point upward.
1.8 GUI Y6 graphic error
1.8 GUI Y6 graphic error
Last edited by tanasit on Thu Sep 22, 2011 7:32 pm, edited 1 time in total.
Re: 1.8 GUI Y6 graphic error
Hi Tanasit,
I would guess, that your sensor orientation is wrong. Could you please make screenshots:
- flat
- upside down
- 90 degrees roll/pitch
regards,
ziss_dm
I would guess, that your sensor orientation is wrong. Could you please make screenshots:
- flat
- upside down
- 90 degrees roll/pitch
regards,
ziss_dm
Re: 1.8 GUI Y6 graphic error
Hi,
How can my sensor orientation is wrong when I used the 1.7 everything was okay?
Or you meant something else that I misunderstood.
The screen shot I posted was in the flat position and the rest are below:
The Y6 is pointing toward the computer screen when I plugged it in and I sit it down that way.
Thanks,
Tanasit
How can my sensor orientation is wrong when I used the 1.7 everything was okay?
Or you meant something else that I misunderstood.
The screen shot I posted was in the flat position and the rest are below:
The Y6 is pointing toward the computer screen when I plugged it in and I sit it down that way.
Thanks,
Tanasit
Re: 1.8 GUI Y6 graphic error
And here what it was in 1.7 sitting flat.