Thanks for the reply, looked at the FAQ. I have everything you mentioned in that post set except this:
set serial_port_1_scenario = 5
set serial_port_2_scenario = 2
SAVE setting port 1 to 5 equates to MSP, CLI, GPS-PASSTHROUGH setting port 2 assigns it for gps , feature GPS will also need to be enabled
I don't have a GPS, so are they needed? Either way my FC via cleanflight doesn't recognize those first two commands(no such setting) and I am unsure exactly what the 3rd line is asking me to do.
Screenshot of current OSD.
http://i5.photobucket.com/albums/y164/J ... g~original--- EDIT
I found the settings in the CLI that I assume are similar to the above, but they aren't scenarios. Not sure what I need to set.
set serial_port_1_functions = 1
set serial_port_1_msp_baudrate = 5
set serial_port_1_telemetry_baudrate = 0
set serial_port_1_blackbox_baudrate = 5
set serial_port_1_gps_baudrate = 4
set serial_port_2_functions = 0
set serial_port_2_msp_baudrate = 5
set serial_port_2_telemetry_baudrate = 0
set serial_port_2_blackbox_baudrate = 5
set serial_port_2_gps_baudrate = 4
set serial_port_3_functions = 0
set serial_port_3_msp_baudrate = 5
set serial_port_3_telemetry_baudrate = 0
set serial_port_3_blackbox_baudrate = 5
set serial_port_3_gps_baudrate = 4
set serial_port_4_functions = 0
set serial_port_4_msp_baudrate = 5
set serial_port_4_telemetry_baudrate = 0
set serial_port_4_blackbox_baudrate = 5
set serial_port_4_gps_baudrate = 4
Thanks in advance!
??
