Someone want "Motor Test" function in MultiWii ?
This function allow to easy test all connected motors by select motor number for test, and set motor speed via slider in GUI.
This is similar to "dynamic prop balance", but work always, not only if code is compiled with "#define DYNBALANCE" enabled. But no fast gyro/acc data is transfered to GUI (but can be).
For now, this can be available from my ServoMiscConf application (windows only) but at future can be available from general MWC GUI.
Motor Test
-
Alexinparis
- Posts: 1630
- Joined: Wed Jan 19, 2011 9:07 pm
Re: Motor Test
Sure it's interesting.
Transmission of a 8 x motor array (in un armed situation for instance)
, each one customisable from the GUI should be a replacement of the current dynbalance function.
#define DYNBALANCE should just be here to enhance thegyro/acc resolution, no more.
Transmission of a 8 x motor array (in un armed situation for instance)
, each one customisable from the GUI should be a replacement of the current dynbalance function.
#define DYNBALANCE should just be here to enhance thegyro/acc resolution, no more.
Re: Motor Test
I hope someone can test this - its of great interest to me. Can't do for a week or so at moment.