HMC5843 problem

This forum is dedicated to software development related to MultiWii.
It is not the right place to submit a setup problem.
Software download
Post Reply
misho
Posts: 2
Joined: Sun May 29, 2011 9:00 am

HMC5843 problem

Post by misho »

I have problem with HMC5843 in dev version MultiWii_dev20110519. Head orientation is good but magX value is fixed to "500", magY to "500" and magZ to "-500".
I dont know why. Can you help me please?

Thank you for answer.

misho
Posts: 2
Joined: Sun May 29, 2011 9:00 am

Re: HMC5843 problem

Post by misho »

I solved the problem with mag. Problem was caused by a hardware error on mag breakboard. I resolder the hmc5843 chip and change electrolytic 4,7uF capacitor to ceramic low esr 4,7uF and it works perfectly now.

Post Reply