I2C GPS Upgrade firmware

This forum is dedicated to software development related to MultiWii.
It is not the right place to submit a setup problem.
Software download
Post Reply
Posts: 22
Joined: Sun Aug 12, 2012 1:49 pm

I2C GPS Upgrade firmware

Post by Neo360 »


I have this GPS http://www.drotek.fr/shop/en/88-i2c-pa6c-gps-llc.html

where is the right metod to upload the new code on the atmega on board?


I try with FTDI port but arduino get this error: avrdude: stk500_getsync () : not in sync resp=0x00

help me please :(

Posts: 2
Joined: Sat Aug 18, 2012 3:32 pm
Location: Cologne

Re: I2C GPS Upgrade firmware

Post by CGN-HMilch »

try to desolder the power-pins on the downside.

now should only the green led blink....

#define NMEA

and upload the code....

now solder the power-pins on the downside and connect like usual

Post Reply