calculating Magnetic Declination

This forum is dedicated to software development related to MultiWii.
It is not the right place to submit a setup problem.
Software download
Post Reply
dpackham
Posts: 16
Joined: Wed Mar 23, 2011 8:50 pm

calculating Magnetic Declination

Post by dpackham »

http://www.ngdc.noaa.gov/geomagmodels/s ... cPointIGRF

this is a better site as it provides all the numbers you need to plug into the software for declination.

User avatar
treym
Posts: 258
Joined: Sat Jul 21, 2012 12:28 am

Re: calculating Magnetic Declination

Post by treym »

with a more user friendly interface

http://www.ngdc.noaa.gov/geomag-web/#igrfgrid

User avatar
brettwal
Posts: 93
Joined: Mon Jun 18, 2012 4:51 pm
Location: Louisiana

Re: calculating Magnetic Declination

Post by brettwal »

Seems like every site I go to I get a different value. In the MultiWii code, what does the f at the end of the value represent? Can someone tell me what value would be plugged into the code for zipcode 70570 in USA?

Wayne
Posts: 86
Joined: Sun Jul 31, 2011 10:44 pm

Re: calculating Magnetic Declination

Post by Wayne »

http://magnetic-declination.com/

OPELOUSAS
Latitude: 30° 31' 60" N
Longitude: 92° 4' 53" W
Magnetic declination: 1° 3' EAST
Declination is POSITIVE
Inclination: 60° 2'
Magnetic field strength: 48244.9

degree+minutes*(1/60)
1+3*1/60 or 1.05f

User avatar
brettwal
Posts: 93
Joined: Mon Jun 18, 2012 4:51 pm
Location: Louisiana

Re: calculating Magnetic Declination

Post by brettwal »

Wayne wrote:http://magnetic-declination.com/

OPELOUSAS
Latitude: 30° 31' 60" N
Longitude: 92° 4' 53" W
Magnetic declination: 1° 3' EAST
Declination is POSITIVE
Inclination: 60° 2'
Magnetic field strength: 48244.9

degree+minutes*(1/60)
1+3*1/60 or 1.05f



Thanks, that is what I have been running with but, I was never 100% sure.

Wayne
Posts: 86
Joined: Sun Jul 31, 2011 10:44 pm

Re: calculating Magnetic Declination

Post by Wayne »

Your declination is so low. Here in No. CA its 14.23.
Has me thinking my less than stellar results with RTH may be because of this.
I have tried 0, 7.12 & 14.23 with no real change.

User avatar
brettwal
Posts: 93
Joined: Mon Jun 18, 2012 4:51 pm
Location: Louisiana

Re: calculating Magnetic Declination

Post by brettwal »

What GPS? I have a UBLOX Neo-6 in binary mode connected via RCTimer i2c module to a Crius AIO Pro. POS HOLD is amazing and RTH is spot on. How's your magnetometer? Solid, calibrated well? Away from EMF noise(ESCs, battery, power distribution board, etc?)

Post Reply