Hi Everyone,
I just updated the code with OpenLRS Multi board support.
https://code.google.com/p/multiwii/sour ... Wii_shared
For OpenLRS Multi board users;
- Enable "OPENLRSv2MULTI" option under IMU list (config.h)
- Select your transmitter frequency/hopping channels and device ID under RX.pde
other setting same with standard boards.
Here is the first flight video of MultiWii 2.0 code on OpenLRS controller.
http://www.youtube.com/watch?v=NeYpZkBe3oM
I will keep updated this post.
Cheers
Melih
OpenLRS Rx MULTI board support
- captaingeek
- Posts: 228
- Joined: Fri Jan 28, 2011 6:42 pm
Re: OpenLRS Rx MULTI board support
nice can you tell us a little more about the boards capabilities, range and cost? Links?
Re: OpenLRS Rx MULTI board support
OPENLRSv2MULTI board support was broken in the h/cpp change...
I'm not able to fix it by my self.
A Orange RX together with a MPU6050 Would make a nice match..
/Patrik
I'm not able to fix it by my self.
A Orange RX together with a MPU6050 Would make a nice match..
/Patrik
- Attachments
-
- Orange_MPU.png
- (150.97 KiB) Not downloaded yet
Re: OpenLRS Rx MULTI board support
It would be nice to implement your aeroplane code inside. Just to try it out.
But the deal is that Melih's original code is not very relevant anymore,...the project that is getting most active developement is Openlrsng -> take a look here: https://github.com/openLRSng/openLRSng
and you will see how the main developer (kha) extended the functions of the original code (a lot of new and interesting features), and there's also an excellent chrome app GUI openlrsng-configurator available to easily configure the boards up.
But the deal is that Melih's original code is not very relevant anymore,...the project that is getting most active developement is Openlrsng -> take a look here: https://github.com/openLRSng/openLRSng
and you will see how the main developer (kha) extended the functions of the original code (a lot of new and interesting features), and there's also an excellent chrome app GUI openlrsng-configurator available to easily configure the boards up.
Re: OpenLRS Rx MULTI board support
It would be nice to implement your aeroplane code inside. Just to try it out.
A complete system inside a standard sized RX case.
That's the idé i was spinning on.
Or a nano sized copter.
At the moment i have UnDead loaded but i'll check out openLRSng.
Tested openlrs first but couldn't bind the modules.
Re: OpenLRS Rx MULTI board support
Openlrsng is based on Undead, but with way way more features and easier configurability, from a serial terminal cli, no need to modify defines and reupload code.