Rushduino OSD - Multiwii based open software osd
Re: Rushduino OSD - Multiwii based open software osd
I thought the capacitor problem only caused a noisy image. Is this still the problem with the 1.2 version of the board?
Right now I have an OSD overlay again (changed nothing) and crystal clear, the OSD just seems to freeze now and then. Not something I would go flying with.
If I can salvage some capacitors anywhere I´ll try and change them.
Thanks
Count
Right now I have an OSD overlay again (changed nothing) and crystal clear, the OSD just seems to freeze now and then. Not something I would go flying with.
If I can salvage some capacitors anywhere I´ll try and change them.
Thanks
Count
Re: Rushduino OSD - Multiwii based open software osd
Any one know how to calibrate barometer altitude from 137 meters on the ground to 0 ?
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
krystal wrote:Any one know how to calibrate barometer altitude from 137 meters on the ground to 0 ?
Hi,
what altitude are you talking about and what firmware are you running on both, Multicopter and OSD?
There is no calibration, OSD will display only what FC sends if you are running KV Team firmware!
Re: Rushduino OSD - Multiwii based open software osd
kataventos wrote:krystal wrote:Any one know how to calibrate barometer altitude from 137 meters on the ground to 0 ?
Hi,
what altitude are you talking about and what firmware are you running on both, Multicopter and OSD?
There is no calibration, OSD will display only what FC sends if you are running KV Team firmware!
Im talking about altitude from Multiwii board. I've got 137m on the ground. I saw your video: http://www.youtube.com/watch?v=V4JkmixV ... e=youtu.be
You have 0 meters on the ground. How you do that? Changes in multiwii code? How?
I've got Multiwii 2.1 minim OSD and newest software Rush_KV_2_1
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
Hi,
you will not be able to have the same results you see on that video with MWc 2.1.
As you can see on main ino Created for Multiwii r1240 or higher, you need to update your MW version.
If you have a Minim OSD use this topic instead: viewtopic.php?f=8&t=2918#p28940
Cheers,
KV
you will not be able to have the same results you see on that video with MWc 2.1.
As you can see on main ino Created for Multiwii r1240 or higher, you need to update your MW version.
If you have a Minim OSD use this topic instead: viewtopic.php?f=8&t=2918#p28940
Cheers,
KV
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
Hi all,
just had this idea and posted it on MINIMOSD topic, so, posting it here too.
I will send to Liam (that take care of the wiki and documentation) all the information on how to edit properly the entire character map.
This way, everyone who want´s to spend some time around it, and creat new Logo will know what to do, and of course to help us to improve some chars.
Everyone that have a good work on that matter can send me the mcm file, and we will eventually pack it with new releases
Good work to all.
Cheers,
KV
just had this idea and posted it on MINIMOSD topic, so, posting it here too.
I will send to Liam (that take care of the wiki and documentation) all the information on how to edit properly the entire character map.
This way, everyone who want´s to spend some time around it, and creat new Logo will know what to do, and of course to help us to improve some chars.
![Wink ;)](./images/smilies/icon_e_wink.gif)
Everyone that have a good work on that matter can send me the mcm file, and we will eventually pack it with new releases
Good work to all.
Cheers,
KV
Re: Rushduino OSD - Multiwii based open software osd
Hi, i saw a new OSD with a better Artificial Horizon and Home arrow. http://www.youtube.com/watch?v=PnqsGFCA8mU
How can we get such goodies?
How can we get such goodies?
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
dramida wrote:Hi, i saw a new OSD with a better Artificial Horizon and Home arrow. http://www.youtube.com/watch?v=PnqsGFCA8mU
How can we get such goodies?
Hi Dramida, I know you saw that Video because when I commented it you received that information!
This "new OSD" software is KV Team next dev without propper information of software source on it.
Like I said before you all need to wait a little more for official, stable and properly tested release, as soon as the entire Team agree that it is ready
![Wink ;)](./images/smilies/icon_e_wink.gif)
But as you know, this software is open source ( that is the thing I like more on this) and you can already use it at your own risc! And please do not ask for detailed instructions, that is being prepared at this moment by the Team member responsable for writing the most complete and understandable tutorials.
Anyway, for the most anxious ones
![Cool 8-)](./images/smilies/icon_cool.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
1- Go to the official KV Team repository;
2- Download a zip file;
3- Upload the KV Team software as before;
4- Open GUI pde with Processing / read;
5- "Reset" EEPROM
6- Configure the OSD according your needs;
7- Write to EEPROM / enjoy
![Wink ;)](./images/smilies/icon_e_wink.gif)
Remember work is in progress!
Cheers,
KV
Last edited by kataventos on Tue Feb 12, 2013 1:14 am, edited 4 times in total.
Re: Rushduino OSD - Multiwii based open software osd
Hello
i have the 3d robotic minim osd (pink) to read the battery voltage on the screen do i have to solder the resistances as on the hobby king minomosd or the is an other way
thank you
RITON B
i have the 3d robotic minim osd (pink) to read the battery voltage on the screen do i have to solder the resistances as on the hobby king minomosd or the is an other way
thank you
RITON B
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
RITON B wrote:Hello
i have the 3d robotic minim osd (pink) to read the battery voltage on the screen do i have to solder the resistances as on the hobby king minomosd or the is an other way
thank you
RITON B
See this and use that topic for Minim OSD:
viewtopic.php?f=8&t=2918&p=30950#p30950
Re: Rushduino OSD - Multiwii based open software osd
Do I need some other files to run KV_Team_OSD_GUI.pde with Processing? I need controlp5 library for sure, what else?
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
KasparsL wrote:Do I need some other files to run KV_Team_OSD_GUI.pde with Processing? I need controlp5 library for sure, what else?
And the mcm file that is on MAX7456 update folder, copy it to the GUI Data folder.
Re: Rushduino OSD - Multiwii based open software osd
When the "Official Release" that contains the GUI is published, it will also contain an application of the GUI, much like what you are used to with mwconfig. This will be much easier to use then having to install processing and all the Dependant libraries.
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
power67 wrote:When the "Official Release" that contains the GUI is published, it will also contain an application of the GUI, much like what you are used to with mwconfig. This will be much easier to use then having to install processing and all the Dependant libraries.
Of course Ross, forgot to say that!
The process posted before is for the most anxious ones that know what they are dealing with at this moment!
Do not expect it to work for everybody in every OS, and we will not give detailed instructions at this time like I said before!
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
Hi all,
please check this link, you are welcome to participate!
https://groups.google.com/forum/?fromgr ... v-team-osd
Cheers,
KV
please check this link, you are welcome to participate!
https://groups.google.com/forum/?fromgr ... v-team-osd
Cheers,
KV
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
Hi all,
If you would like to give us the pleasure to try our work
http://www.kvteamosd.com
Have fun!
1- upload the new Char map like before (do not use the one on GUI for now);
2- upload the Team dev (look at config.h, still are a few options left);
3- open GUI and your port, make a RESET;
4- configure it according your needs and save;
5- close port, done.
The Wiki already have crucial information about the GUI, to make possible for you to understand what to do once you´r there!
![Image](https://lh5.googleusercontent.com/-zqSQmiqMmaA/UR-nSM4lB6I/AAAAAAAAASc/rM-Zhhlx3qo/s1001/My+working+setup.png)
If you would like to give us the pleasure to try our work
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
Have fun!
1- upload the new Char map like before (do not use the one on GUI for now);
2- upload the Team dev (look at config.h, still are a few options left);
3- open GUI and your port, make a RESET;
4- configure it according your needs and save;
5- close port, done.
The Wiki already have crucial information about the GUI, to make possible for you to understand what to do once you´r there!
![Image](https://lh5.googleusercontent.com/-zqSQmiqMmaA/UR-nSM4lB6I/AAAAAAAAASc/rM-Zhhlx3qo/s1001/My+working+setup.png)
-
- Posts: 2261
- Joined: Sat Feb 19, 2011 8:30 pm
Re: Rushduino OSD - Multiwii based open software osd
Outstanding Work, Great Job.
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: Rushduino OSD - Multiwii based open software osd
Hi all,
this may help http://www.youtube.com/watch?v=egStpPl9 ... e=youtu.be thanks for watching!
Cheers,
KV
this may help http://www.youtube.com/watch?v=egStpPl9 ... e=youtu.be thanks for watching!
Cheers,
KV
Re: Rushduino OSD - Multiwii based open software osd
Hi all!
I am new to this interesting forum and I have a basic question.
I have successfully updated my software Minimosd with KV Team and works well.
But I have doubts about how I should connect the three components that make up my FPV system, GPS, Crius se and minimOSD.
I have this GPS and I do not know if it is compatible:
http://www.ebay.es/itm/Very-Small-MT3339-PA6C-GPS-multiwii-multirotor-arduino-flight-controller-/271079582518?pt=FR_YO_MaisonJardin_Bricolage_ElectroniqueComposants&hash=item3f1d9a2b36
Greetings and thanks.
I am new to this interesting forum and I have a basic question.
I have successfully updated my software Minimosd with KV Team and works well.
But I have doubts about how I should connect the three components that make up my FPV system, GPS, Crius se and minimOSD.
I have this GPS and I do not know if it is compatible:
http://www.ebay.es/itm/Very-Small-MT3339-PA6C-GPS-multiwii-multirotor-arduino-flight-controller-/271079582518?pt=FR_YO_MaisonJardin_Bricolage_ElectroniqueComposants&hash=item3f1d9a2b36
Greetings and thanks.
Re: Rushduino OSD - Multiwii based open software osd
Soko,
Thank you for trying the KV_Team OSD software solutions.
I have almost the exact same components and have used them extensively for testing.
The main issue you will be faced with that type of Multiwii board is that it only has the ability to have one serial device. That will limit you to using the GPS or the OSD, not both.
However, search this forum and the web for an I2c to serial solution that will be able to go between the flight controller board and the gps. Your FC board does not have the I2c pins brought out to a pin header, but again, search the forum for assistance, I and many other have been successful at doing it.
With the Kv Team OSD software and these devices, it is possible to have a great system at an affordable price.
Take advantange of the wealth of knowledge that is on this forum and use the search engine well and you will be up and flying in now time at all.
Good luck
Ross
Thank you for trying the KV_Team OSD software solutions.
I have almost the exact same components and have used them extensively for testing.
The main issue you will be faced with that type of Multiwii board is that it only has the ability to have one serial device. That will limit you to using the GPS or the OSD, not both.
However, search this forum and the web for an I2c to serial solution that will be able to go between the flight controller board and the gps. Your FC board does not have the I2c pins brought out to a pin header, but again, search the forum for assistance, I and many other have been successful at doing it.
With the Kv Team OSD software and these devices, it is possible to have a great system at an affordable price.
Take advantange of the wealth of knowledge that is on this forum and use the search engine well and you will be up and flying in now time at all.
Good luck
Ross
Re: Rushduino OSD - Multiwii based open software osd
Thank you very much for your reply Ross,
I looked for information in the forums and I think I have my skills a little more clear.
Attached is a picture of how I think the hardware is connected (in case it helps someone), I now see the code to know that I have to change.
Greetings.
I looked for information in the forums and I think I have my skills a little more clear.
Attached is a picture of how I think the hardware is connected (in case it helps someone), I now see the code to know that I have to change.
Greetings.
Re: Rushduino OSD - Multiwii based open software osd
Soko,
Glad to be able to help.
depending on your gps module, you may have to move the vcc feed down to the 5v output, but other than that, you should be good to go with that setup.
Keep us posted as to how you are doing.
Ross
Glad to be able to help.
depending on your gps module, you may have to move the vcc feed down to the 5v output, but other than that, you should be good to go with that setup.
Keep us posted as to how you are doing.
Ross