MegapirateNG on Multiwii EZ pro 3

This forum is dedicated to software development related to MultiWii.
It is not the right place to submit a setup problem.
Software download

MegapirateNG on Multiwii EZ pro 3

Postby flygone » Sun Jun 25, 2017 7:41 am

Hi alls,
Can you tell me if it is possible to use MegapirateNG on Multiwii EZ Pro3 ? (not Blacked edition, mine has Compas)
http://www.readytoflyquads.com/multiwii-pro-ez3-0-flight-controller-w-gps-option
Thank you.
flygone
 
Posts: 19
Joined: Sun Sep 06, 2015 8:28 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby Kbev5709 » Sun Jun 25, 2017 5:13 pm

It would probably work but it would be a downgrade from the latest multiwii release.
Kbev5709
 
Posts: 451
Joined: Mon Aug 17, 2015 5:56 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby flygone » Sun Jun 25, 2017 6:24 pm

Hi, you have raison, if I do update by mission planner, system not respond.....
If I load with flash tool, it's ok.
So I have just a problem to configure my serial gps, I don't know witch port use ?
flygone
 
Posts: 19
Joined: Sun Sep 06, 2015 8:28 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby flygone » Mon Jun 26, 2017 9:48 pm

Hi Kbev, can you explain me why MW ez pro3 don't support the last firmware ?
Thank you

My gps,is,ok now :D
flygone
 
Posts: 19
Joined: Sun Sep 06, 2015 8:28 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby Kbev5709 » Wed Jun 28, 2017 8:31 pm

I have that fc and 2.4 works great on it.
Kbev5709
 
Posts: 451
Joined: Mon Aug 17, 2015 5:56 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby flygone » Wed Jun 28, 2017 10:00 pm

So, is it possible to load this firmware directly by Mission planner ????
And where do you find this version ?
All the best..
flygone
 
Posts: 19
Joined: Sun Sep 06, 2015 8:28 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby Kbev5709 » Thu Jun 29, 2017 1:17 am

Just download version 2.4 and install it using the Arduino IDE. Mission planner is for creating gps missions, not for updating firmware.
Kbev5709
 
Posts: 451
Joined: Mon Aug 17, 2015 5:56 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby flygone » Thu Jun 29, 2017 11:59 am

Ok with Arduino, but in Mission planer there this possibility, but impossible to selected versions. (same in windows)
Capture d’écran 2017-06-29 à 12.56.35.png
flygone
 
Posts: 19
Joined: Sun Sep 06, 2015 8:28 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby Kbev5709 » Thu Jun 29, 2017 4:53 pm

Mission planner is for arducopter, not multiwii.
Kbev5709
 
Posts: 451
Joined: Mon Aug 17, 2015 5:56 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby flygone » Thu Jun 29, 2017 7:45 pm

yes, but arducopter or multiwii are based on same Atemga 2560, I don' understand the subtleties...
flygone
 
Posts: 19
Joined: Sun Sep 06, 2015 8:28 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby Kbev5709 » Fri Jun 30, 2017 12:46 am

It's pretty simple. Arducopter and Multiwii are two different firmwares that can run on the same hardware. Not interchangable as they are two separate development platforms. Use one firmware or the other.
They do NOT work together.
Kbev5709
 
Posts: 451
Joined: Mon Aug 17, 2015 5:56 pm

Re: MegapirateNG on Multiwii EZ pro 3

Postby flygone » Fri Jun 30, 2017 6:26 am

Hi kbev
Arducopter and Multiwii are two different firmwares that can run on the same hardware.

I agree with you, that's why I do not understand why the installations of the last firmware from mission planner does not work.
Actually, I must install old firm via Flashtool or IDE Arduino and it's OK to conned mission planner.
flygone
 
Posts: 19
Joined: Sun Sep 06, 2015 8:28 pm


Return to Software development

Who is online

Users browsing this forum: Google Adsense [Bot] and 4 guests