Problem with GY-521 on Arduino Pro Mini

Post Reply
thinhhoang
Posts: 2
Joined: Thu Jul 11, 2019 7:00 am

Problem with GY-521 on Arduino Pro Mini

Post by thinhhoang »

I have a issue when try module GY-521. On Multiwii GUI, ROLL of Acc always is -1000. anyone can help me?
Image

My steps:
1. uncomment define QUADX
2. uncomment define GY_521
3. upload.

I tried 2 module GY-521, the result is same.

thinhhoang
Posts: 2
Joined: Thu Jul 11, 2019 7:00 am

Re: Problem with GY-521 on Arduino Pro Mini

Post by thinhhoang »

Has anyone with GY-521 working?

tom9212
Posts: 1
Joined: Fri Apr 09, 2021 9:52 am

Re: Problem with GY-521 on Arduino Pro Mini

Post by tom9212 »

After this heavy registration process, I achieved to access this forum ;)

I have GY-521 now working.
In the beginning I ran into exact the same problem, but it was because I had cleaned the eeprom before. (Due to some other problems)

One click on „CALIB_ACC“ an everything was fine :)

Hope this helps someone with the same issue.

Post Reply