I have a issue when try module GY-521. On Multiwii GUI, ROLL of Acc always is -1000. anyone can help me?
My steps:
1. uncomment define QUADX
2. uncomment define GY_521
3. upload.
I tried 2 module GY-521, the result is same.
Problem with GY-521 on Arduino Pro Mini
-
- Posts: 2
- Joined: Thu Jul 11, 2019 7:00 am
Re: Problem with GY-521 on Arduino Pro Mini
Has anyone with GY-521 working?
Re: Problem with GY-521 on Arduino Pro Mini
After this heavy registration process, I achieved to access this forum
I have GY-521 now working.
In the beginning I ran into exact the same problem, but it was because I had cleaned the eeprom before. (Due to some other problems)
One click on „CALIB_ACC“ an everything was fine
Hope this helps someone with the same issue.
I have GY-521 now working.
In the beginning I ran into exact the same problem, but it was because I had cleaned the eeprom before. (Due to some other problems)
One click on „CALIB_ACC“ an everything was fine
Hope this helps someone with the same issue.