i have my quadcopter aux 1 set to channel 5 off my tx and its on high ,i was wondering in the gui 1.8 dev its got low med high ive set mine to high call me stupid but what does low and med used for any info would be great cheers everybody..
dave..
ps ive checked internet but could not see any thing so i thought id embarass my self here lol
gui low med high
Re: gui low med high
hey dave,
thats easy, if you got an switch on your RC that has 3 points to choose or an potentiometer, you can adjust different settings depending on the low, mid or high posistion of this switch.
Example,
if your switch is in position off -> Quad does not use any sensors if no boxes are checked
-> switch in the middle are mag and acc sensors if the boxes are checked
->stick high are mag accc and baro if the boxes are checked
hope that helped you out,
cheers
noc
thats easy, if you got an switch on your RC that has 3 points to choose or an potentiometer, you can adjust different settings depending on the low, mid or high posistion of this switch.
Example,
if your switch is in position off -> Quad does not use any sensors if no boxes are checked
-> switch in the middle are mag and acc sensors if the boxes are checked
->stick high are mag accc and baro if the boxes are checked
hope that helped you out,
cheers
noc