Multiwii SE v3.0 with UBLOX GPS Module V2.0 Problem
Posted: Fri Jan 30, 2015 8:13 am
Hello guys,
I'm new here but red a lot of threads already.
Now I have a Multiwii SE v3.0 with a UBLOX GPS Module v2.0 (with compass).
When I wire all things up the UBLOX GPS won't power up.
GPS is on the serial port (-+rxtx -rx tx crossed) and the compass (only SCL and SDA) connected.
I did a check on the +- on the serial port but no 5v here, that's why the GPS won't power up.
Is this something that I can fix in the config?
Please help on this .
Config Multiwii v2.3:
#define GPS_SERIAL 2
#define GPS_BAUD 115200
#define NMEA
#define GPS_LED_INDICATOR
Multiwii SE v3.0 board:
UBLOX GPS module v2.0
I'm new here but red a lot of threads already.
Now I have a Multiwii SE v3.0 with a UBLOX GPS Module v2.0 (with compass).
When I wire all things up the UBLOX GPS won't power up.
GPS is on the serial port (-+rxtx -rx tx crossed) and the compass (only SCL and SDA) connected.
I did a check on the +- on the serial port but no 5v here, that's why the GPS won't power up.
Is this something that I can fix in the config?
Please help on this .
Config Multiwii v2.3:
#define GPS_SERIAL 2
#define GPS_BAUD 115200
#define NMEA
#define GPS_LED_INDICATOR
Multiwii SE v3.0 board:
UBLOX GPS module v2.0