HELP! Error code
-
- Posts: 4
- Joined: Tue Apr 08, 2014 7:24 am
HELP! Error code
I keep getting this error code avrdude: stk500_getsync(): not in sync: resp=0x00 when I try to upload my sketch to the 328p. I can successfully connect to the GUI on the same COM port but it doesn't seem to work uploading the sketch. What gives?
- Gartenflieger
- Posts: 65
- Joined: Sat Oct 01, 2011 10:07 pm
- Location: Dortmund, Germany
Re: HELP! Error code
Did you select the correct board type in Arduino?
Re: HELP! Error code
Did you close the GUI before opening Arduino?
Google this error as it is common and has many causes.
Google this error as it is common and has many causes.
-
- Posts: 4
- Joined: Tue Apr 08, 2014 7:24 am
Re: HELP! Error code
The wrong board was selected. Strange, I never went in a changed it, not sure how that happened. Thanks for the help!