HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

Postby Nickman1200 » Sat Jul 13, 2013 7:21 pm

As I didn't find a dedicated thread about this board in this forum here we go.

This is sold by Hobby King: MultiWii_328P_Flight_Controller_w_FTDI_DSM2_Port

In config.h from MultiWii v2.2 and newer choose:
#define HK_MultiWii_328P
also
#define RCAUXPIN12 (seen in the pricture below)

One thing I found out today was that if you want to connect a Blutooth module you can use AX2, AX3 and then you don't even have to solder any pins.
Another advantage of using AX2 instead of the middle pin on JP1 is that you can leave the strap on USB enable.

I made a picture from all information I could find on the internet.
Maybe it's of use to someone more then me. (Which I had it when i got my card)

Image
Uploaded with ImageShack.us
Nickman1200
 
Posts: 36
Joined: Sat Jul 06, 2013 10:31 am

Re: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

Postby emes » Mon Feb 24, 2014 12:43 pm

There's ISP interface too:

Image
emes
 
Posts: 1
Joined: Mon Feb 10, 2014 2:57 pm

Re: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

Postby handsomejackuk » Mon Sep 15, 2014 5:47 pm

can anyone give me some further information on how to use ax2, ax3 for bluetooth connection please...

thanks Alun
handsomejackuk
 
Posts: 97
Joined: Mon Sep 08, 2014 12:25 am

Re: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

Postby Nickman1200 » Wed Sep 17, 2014 6:57 pm

handsomejackuk wrote:can anyone give me some further information on how to use ax2, ax3 for bluetooth connection please...

thanks Alun


Just look at the picture above. All information is there :roll:

Connect:
TX on the BT module to RXI (AX2)
RX on the BT module to TX0 (AX3)
GND to GND on either AX3 or AX2
VCC to VCC on either AX3 or AX2

Here is a picture just in case :geek:
Image
Nickman1200
 
Posts: 36
Joined: Sat Jul 06, 2013 10:31 am

Re: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

Postby handsomejackuk » Wed Sep 17, 2014 10:31 pm

got that thanks i will try that setup for now i want to try and get the oled display to work too...
handsomejackuk
 
Posts: 97
Joined: Mon Sep 08, 2014 12:25 am

Re: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

Postby handsomejackuk » Thu Sep 18, 2014 12:59 am

sorted that one thanks.... got to say i would never have worked that out... done the first multiwii 2.2 sketch upload too....

just need to get the oleg working now....!!!
handsomejackuk
 
Posts: 97
Joined: Mon Sep 08, 2014 12:25 am

Re: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

Postby ACME Milli-Rotor » Thu Jun 11, 2015 1:02 am

Wow nice pin chart I'll now I know were to look when I want to add BT, Thanks
ACME Milli-Rotor
 
Posts: 5
Joined: Wed Jun 10, 2015 2:42 am

Re: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

Postby Villalji » Fri Oct 09, 2015 6:15 pm

Hi! Im new in this Forum but not so much to multiwii last year I succesfully flown a tricopter using this board, and now I want to upgrade it with BT and GPSbut I do not know how to connect them at the same time. I have this BT module:
http://rover.ebay.com/rover/0/e11400.m1842.l5919/7?euid=428e7d3388bf40cbaf51704f206d5bd8&loc=http%3A%2F%2Fpayments.ebay.de%2Fws%2FeBayISAPI.dll%3FViewPaymentStatus%26transId%3D1696913344016%26itemId%3D262019619370%26qu%3D1
And this GPS:
http://rover.ebay.com/rover/0/e11400.m1842.l5919/7?euid=8d8e50d3590a477f97680b440c717bcc&loc=http%3A%2F%2Fpayments.ebay.de%2Fws%2FeBayISAPI.dll%3FViewPaymentStatus%26transId%3D1535869740017%26itemId%3D271860471415%26qu%3D1
Could you show in the board diagram how to connect them?

Thank a bunch!
Villalji
 
Posts: 1
Joined: Fri Oct 09, 2015 6:01 pm


Return to Shields, boards and sensors

Who is online

Users browsing this forum: No registered users and 1 guest

cron