Hi,
I am new here and i hope i put that topic correctly
Here is my question:
Could i use the GPS Modul from Multiplex with my Flyduino Pro Micro board? Or does it not work with the Multiwii code?
Here is the GPS Modul:
http://www.multiplex-rc.de/en/products/ ... pitems_pi1[action]=show&tx_lwshopitems_pi1[controller]=Product&cHash=a7657a7cb7206eb95be6420d7509d809
Cheers,
Sven
Flyduino Pro Micro + 10DOF IMU GY-86 + Multiplex GPS Modul
-
- Posts: 10
- Joined: Tue Jan 15, 2013 6:44 pm
Re: Flyduino Pro Micro + 10DOF IMU GY-86 + Multiplex GPS Mod
It's unclear to me what kind of output this device provides. Does it have a serial interface, issuing NMEA sentences?
-
- Posts: 10
- Joined: Tue Jan 15, 2013 6:44 pm
Re: Flyduino Pro Micro + 10DOF IMU GY-86 + Multiplex GPS Mod
Hi,
I have the same problem.... but if you could give me a questions about that product that will bring us to a answer then I would like to ask Multiplex about it. And we will have soon the answer for my topic XD
I will ask them out the output... i hope i could get an answer
I will update this topic then!
Regards,
Sven
I have the same problem.... but if you could give me a questions about that product that will bring us to a answer then I would like to ask Multiplex about it. And we will have soon the answer for my topic XD
I will ask them out the output... i hope i could get an answer
I will update this topic then!
Regards,
Sven
Re: Flyduino Pro Micro + 10DOF IMU GY-86 + Multiplex GPS Mod
Well, the pin assignment and protocol (Serial, I2C or something else) would be the most useful information to begin with. Also the update rate is crucial, 5-10Hz are useful, 1Hz is usually too slow.
What I'm unclear about: why this one? Do you already own it? If not, I'd suggest you look into alternatives that are known to work instead, like this one, for example.
What I'm unclear about: why this one? Do you already own it? If not, I'd suggest you look into alternatives that are known to work instead, like this one, for example.
-
- Posts: 10
- Joined: Tue Jan 15, 2013 6:44 pm
Re: Flyduino Pro Micro + 10DOF IMU GY-86 + Multiplex GPS Mod
Hi I got all Information from Multiplex in a pdf document.
https://www.dropbox.com/s/oempl5fmpzbc5 ... Bus_V2.pdf
Do you need more Informations?
Cheers,
Sven
https://www.dropbox.com/s/oempl5fmpzbc5 ... Bus_V2.pdf
Do you need more Informations?
Cheers,
Sven
Re: Flyduino Pro Micro + 10DOF IMU GY-86 + Multiplex GPS Mod
Thanks! I looked at this document and it seems like Multiplex has developed their own communication protocol. So MultiWii does not support this device out of the box, you would have to implement their protocol first. There seems to be an existing Arduino library, but it's certainly not a trivial task to merge this into the MultiWii code base (if the license actually allows it).
-
- Posts: 10
- Joined: Tue Jan 15, 2013 6:44 pm
Re: Flyduino Pro Micro + 10DOF IMU GY-86 + Multiplex GPS Mod
Ok many Thanks, I will buy a supported GPS modul.