MultiWii

I'm make Arduino shield for my friend. He bought Arduino UNO. This shield have:

- LOGIC LEVEL CONVERTER
- 3 x IMU
- +5V OUTPUT
- CAM and CAM ROLL output
- POWER STATUS
- ARDUINO STATUS

What did you use to create this layout? Can you share the PDF or source code please?

Thank you.

I'm use EAGLE 5.10. Send me private message with your email adress and I send to you sorce. OK.

I'm prepare my project page. Here I'm upload source file for Arduino UNO shield.

http://code.google.com/p/spetosk-projects/downloads/list

Hi,
1- Is this shield for 3copter or quad? i think it works for tricopter because there are 3 motors and one servo.
2- If my idea is wrong, can we connect gps to imu on shield?
3- and please put part list that necessary for shield and if you can, a manual for assemble.

thanks

rof1980 wrote:Hi,
1- Is this shield for 3copter or quad? i think it works for tricopter because there are 3 motors and one servo.
2- If my idea is wrong, can we connect gps to imu on shield?
3- and please put part list that necessary for shield and if you can, a manual for assemble.

thanks

I prepare this shield for my friend. He has QuadCopter. Part list is in schematic.

Here is link:

http://code.google.com/p/spetosk-projects/downloads/detail?name=Arduino%20UNO%20shield.rar&can=2&q=#makechanges

Thank you,
I saw the .sch file and .png file, but i am not good in this things, can you put a pic from complete shield. that will be a good way for understanding part list. if you can't please write part list here.
for example in .png file we have C1 and C2 but in .sch file they aren't there. and which LLC is good for shield?
I think you should add part list to pics and it is very helpful for someone like me who are not professional in electronics.
Thanks

Hi All, I'm a newbie and I'm interested to by your shield, can you make a pdf or gerber file with schematic and pcb borad? I'm not an user Eagle, it's a free? i use Kicad and it work very well. In an another way I want use a WMP and a MMA7455 for make a QuadCopter, but the MMA7455 use 3V and i think i will make a change on your shield.
Thank you in advance! Sylvain

EDIT: This morning, I install and use Eagle as Freeware...

Sorry, didn't have time for change pcb and add parts. But now I'm prepare for us new file on this page:

http://code.google.com/p/spetosk-projects/downloads/detail?name=Arduino%20UNO%20shield%20with%20all%20parts.rar&can=2&q=#makechanges