Hi,
I am one of the lucky people to have one of the beta flyduino's and so i have built a new frame etc for it. Its a quad in X config with 415 mm motor to motor(KDA20-50's) and herein lies my problem, i cant find the motor numbers for a quadX setup , can anyone enlighten me please as im so close to a test flight and that is all thats holding me back.
Thanks in advance
Ray
Flyduino Mega
Re: Flyduino Mega
Hi,
I fly my xquad copters with following motor config:
http://static.rcgroups.net/forums/attac ... 1291037190
Greetings kayle
I fly my xquad copters with following motor config:
http://static.rcgroups.net/forums/attac ... 1291037190
Greetings kayle
Re: Flyduino Mega
Hi Kayle,
LOL so do i with my pro mini's but the Flyduino is a new board that is just becoming available and it has different motor pins, if you look at the 1.7 sketch you will see you can select pro mini or mega because of the differences.
Thanks anyway, your heart is in the right place!
Ray
LOL so do i with my pro mini's but the Flyduino is a new board that is just becoming available and it has different motor pins, if you look at the 1.7 sketch you will see you can select pro mini or mega because of the differences.
Thanks anyway, your heart is in the right place!
Ray
Re: Flyduino Mega
Hey ray,
Sorry. I must read the posts much better.
Greetings kayle
Sorry. I must read the posts much better.
Greetings kayle
-
- Posts: 1630
- Joined: Wed Jan 19, 2011 9:07 pm
Re: Flyduino Mega
it's now documented on this link:
http://www.multiwii.com/?page_id=103
http://www.multiwii.com/?page_id=103
Re: Flyduino Mega
Thanks Alex, ive been struggling all day with the only motor pin out i could find on berkleys site and i knew it wasnt right, Hopefully i can get the flyduino airborne tomorrow.
Ray
Ray