Dear sirs
By mistake I loaded with Flash Tool v122 the MTK_AllInOne_DA_MT3329_v4.02 download agent and the AXN2.10_5156_3339_1152.1101000.10 firmware in to a Mediatek 3329 GPS (Skylab).
The problem is that my GPS is the 3329 and after loading 3339 firmware It does not work and when I try to flash It again it gives error:
[Flash Download]
Fail!!(Download) BROM_CMD_START_FAIL
[Finish]
Take(4) secs to test.
***********************************************
GOOD NEWS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SOLVED !!!!!!!!!!!!
The problem was Flash Tool v1.2.2 I used DIY DRones Flash Tool v1.0.0 and the GPS accepted again the correct firmware and its working :):):):):):):)
Tried again with Flash Tool v1.2.2 and the problem occurred again and solved i again with Flash Tool v1.0.0.
CONCLUSION....................
form Mediatek 3329 GPS is best to use Flash Tool v1.0.0 from DIY Drones
SOLVED! GPS bad flash. need help please..
-
- Posts: 33
- Joined: Thu Sep 15, 2011 10:45 am
Re: SOLVED! GPS bad flash. need help please..
Help me please, how it can be possible to reflesh AXN firmware?
I see that my gps have axn 2.11 firmware and i try to flash the axn 1.51 but now dont works anythings even if the flash is successful!
Please help me.
I tried with flash tool 1.0.0 but dont save me
I see that my gps have axn 2.11 firmware and i try to flash the axn 1.51 but now dont works anythings even if the flash is successful!
Please help me.
I tried with flash tool 1.0.0 but dont save me
Re: SOLVED! GPS bad flash. need help please..
Please help me, there is no chance to reflash the firmware in case of bad flash?
Now if i put the correct firmware i see always this message:
[Flash Download]
Fail!!(Download) BROM_CMD_START_FAIL
[Finish]
Take(6) secs to test.
I try with the vcc trick but dont works.
I try with flash tool 1.0.0 but dont works.
I try with flash tool 1.2.2 but dont works.
Please help me
Now if i put the correct firmware i see always this message:
[Flash Download]
Fail!!(Download) BROM_CMD_START_FAIL
[Finish]
Take(6) secs to test.
I try with the vcc trick but dont works.
I try with flash tool 1.0.0 but dont works.
I try with flash tool 1.2.2 but dont works.
Please help me
-
- Posts: 33
- Joined: Thu Sep 15, 2011 10:45 am
Re: SOLVED! GPS bad flash. need help please..
I'm no Guru.
Are you sure that you are selecting the correct download agent for your GPS chip?
Are you sure that you are selecting the correct download agent for your GPS chip?
Re: SOLVED! GPS bad flash. need help please..
Hi,
I want to downgrade my MediaTek MT3329 GPS 10Hz firmware to v1.4
but the program flash tool 1.0.0 which I downloaded it from DIY drones, but it keeps display this message to me
[Flash Download]
Fail!!(Download) BROM_CMD_START_FAIL
[Finish]
Take(5) secs to test.
and i followed the instructions to change the firmware hardware and software, but with no luck
please help me
I want to downgrade my MediaTek MT3329 GPS 10Hz firmware to v1.4
but the program flash tool 1.0.0 which I downloaded it from DIY drones, but it keeps display this message to me
[Flash Download]
Fail!!(Download) BROM_CMD_START_FAIL
[Finish]
Take(5) secs to test.
and i followed the instructions to change the firmware hardware and software, but with no luck
please help me
-
- Posts: 33
- Joined: Thu Sep 15, 2011 10:45 am
Re: SOLVED! GPS bad flash. need help please..
I do not know version 1.4? were did you get it?
Try installing the MTK3329_A1.5E_20110118_10Hz_115200.bin.
Its the one that I'm presently using with good results
Try installing the MTK3329_A1.5E_20110118_10Hz_115200.bin.
Its the one that I'm presently using with good results
-
- Posts: 15
- Joined: Fri Oct 12, 2012 1:13 am
Re: SOLVED! GPS bad flash. need help please..
Power trick helped me quiet often.
Power on the GPS AFTER hitting "Download".
I flashed 3329 fw to a 3339 and rescued it that way.
Power on the GPS AFTER hitting "Download".
I flashed 3329 fw to a 3339 and rescued it that way.