Here is an update on my FPV development. I have decided to build an all-in-one Flight controller and OSD system. It has two Arduinos, an ATMega1280 tasked to handle all of the main Flight control Functions and an ATmega328 Nano to handle the housekeeping tasks such as OSD nd Telemetry.
Here are a could of pictures of the build in process.
This puppy is going on my newest version of the SweptBack Copter with the Original V-Prop system.
FPV All-in-One Flight Controller
Re: FPV All-in-One Flight Controller
Which sensors are on the green board
-
- Posts: 2261
- Joined: Sat Feb 19, 2011 8:30 pm
Re: FPV All-in-One Flight Controller
The final version wiring did not turn out to bad, still need to clean the excess flux and glue down the wiring. All-in-all, I am very happy. Testing can not begin.
The sensor shown is a Pololu MinIMU-9.
The sensor shown is a Pololu MinIMU-9.
-
- Posts: 2261
- Joined: Sat Feb 19, 2011 8:30 pm
Re: FPV All-in-One Flight Controller
http://youtu.be/bUh0lYWqZqg
A small preview of the OSD with artificial horizon. For more details about the OSD, see this webpage: http://www.multiwii.com/forum/viewtopic.php?f=8&t=1498
A small preview of the OSD with artificial horizon. For more details about the OSD, see this webpage: http://www.multiwii.com/forum/viewtopic.php?f=8&t=1498
-
- Posts: 2261
- Joined: Sat Feb 19, 2011 8:30 pm
Re: FPV All-in-One Flight Controller
Here are a couple of pictures of the Antenna Tracking Controller that will accompany this All-in-One Flight controller.
The communication software is based upon: http://www.rcgroups.com/forums/showthread.php?t=1651310
And the Antenna Tracker.
The communication software is based upon: http://www.rcgroups.com/forums/showthread.php?t=1651310
And the Antenna Tracker.
Re: FPV All-in-One Flight Controller
subscribed
-
- Posts: 2261
- Joined: Sat Feb 19, 2011 8:30 pm
Re: FPV All-in-One Flight Controller
After a very long rest period, I resumed development of my upgraded Sweptback-II copter. It is using a Pololu MinIMU-9 Gyro, Accelerometer (L3G4200D, LSM303DLx_ACC) and I read nothing but negative things about the crapy gyro. Does not look crapy to me. I plugged in the PID settings for the Original Sweptback and see for yourself. I need to do lots more testing and finalizing the build before I can give the stamp of approval to the MinIMU-9.
http://www.youtube.com/watch?v=FsuGRrF3isI
http://www.youtube.com/watch?v=FsuGRrF3isI
-
- Posts: 702
- Joined: Sun Aug 28, 2011 8:14 pm
- Contact:
Re: FPV All-in-One Flight Controller
haydent wrote:subscribed
+1