Page 1 of 1
Source for motion plus
Posted: Thu Jan 12, 2012 7:11 pm
by Camblonie
Anyone have a source for motion plus's in the US? Seems like nobody stocks the add on piece anymore, only the new built in controller. I have a clone that barely registers anything on the config, might be just line noise. I have it wired to an Arduino UNO powered from the USB but I don't think that would matter. The only alternative I see is the 3200 which is $50.
Re: Source for motion plus
Posted: Thu Jan 12, 2012 7:54 pm
by tovrin
i found mine on craigslist, a lady was selling all her wii stuff and had 2 for $5 each
Re: Source for motion plus
Posted: Fri Jan 13, 2012 12:38 pm
by Waldmensch
If You plan to use an BMA020 as ACC as well you can use the clone by cutting the Chip. Works great!
http://fpv-community.de/wiki/index.php? ... 0_WMPCLONEI use this WMP Clone on several WiiCopter
http://www.dealextreme.com/p/premium-mo ... hite-32506 soldered with manual linked above
Re: Source for motion plus
Posted: Fri Jan 20, 2012 4:09 am
by Camblonie
Re: Source for motion plus
Posted: Sat Feb 04, 2012 8:40 pm
by animan
Some Radio Shack stores still have them. I found mine there.
You can go to radioshack.com, look up Wii Motion Plus and check local store availability by entering your zip code.
4 stores in my area had them in stock.
Re: Source for motion plus
Posted: Fri Jan 11, 2013 6:53 am
by liono1787
Has anyone used the built in controller? I am curious if everything needed is in on central location on the board and what the connections would look like.