MultiWii 2.4 and uBlox NEO M8N

MultiWii 2.4 and uBlox NEO M8N

Postby Leo » Sat Jan 06, 2018 6:34 pm

I'm posting this for those who are still flying MultiWii (anyone???) and have wondered if the latest uBlox GPS receivers work.
Answer: They do :-)

I'm using this model: https://www.banggood.com/Ublox-NEO-M8N-Flight-Controller-GPS-with-Protective-Shell-for-PIX-PX4-Pixhawk-p-1005394.html

I hooked it up to my Crius AIO 2.x board like this:

Image

As a precautionary measure for the MAG I placed a sheet of mu-metal inside the GPS mount before snapping the GPS in place:

Image

With this setup I now get ca. 17-19 satellites, before 9-10:

Image

Important: The GPS module comes set default at 38400 baud. You will have to set the same value in your MultiWii conf file or else it will not work.

Leo
User avatar
Leo
 
Posts: 372
Joined: Wed Sep 17, 2014 7:01 am
Location: Germany

Re: MultiWii 2.4 and uBlox NEO M8N

Postby speedactyl » Mon Jan 29, 2018 3:03 am

wonder how do you set the codes to run on the NEO8?
speedactyl
 
Posts: 3
Joined: Mon Mar 09, 2015 9:48 am

Re: MultiWii 2.4 and uBlox NEO M8N

Postby Leo » Mon Jan 29, 2018 7:05 am

It worked out of the box. I only had to make sure that the baud rate in MW is set to the GPS module.
User avatar
Leo
 
Posts: 372
Joined: Wed Sep 17, 2014 7:01 am
Location: Germany

Re: MultiWii 2.4 and uBlox NEO M8N

Postby vpb » Fri Mar 02, 2018 7:10 pm

Oh good news, 17-19 sats is so amazing. I'm currently using Rctimer u-Blox CN-06 GPS Receiver V3.1, it works fine but can't reach that number of satellites of yours.
vpb
 
Posts: 231
Joined: Mon Jul 23, 2012 4:09 pm

Re: MultiWii 2.4 and uBlox NEO M8N

Postby synersignart » Wed Aug 15, 2018 4:07 am

ya just setup my M8N last night it work like a charm it s even more accurate than my phone's GPS funny the baud got en from apm is 9600
User avatar
synersignart
 
Posts: 39
Joined: Wed Mar 22, 2017 3:57 am


Return to Shields, boards and sensors

Who is online

Users browsing this forum: No registered users and 2 guests

cron