Multiwii MWC SE Flight Control Board V1.0 for $40

[captaingeek]

Multiwii MWC SE Flight Control Board V1.0
http://www.rctimer.com/index.php?gOo=go ... oductname=
$40.00

[copterrichie]

it has an 8-bit Microcontroller

[brettwal]

it has an 8-bit Microcontroller

I does, and it works like a charm too. A good board for a lite, small build.

[copterrichie]

I does, and it works like a charm too. A good board for a lite, small build.

Exactly right, Lite.

If GPS is desired, then one has to get a Mega or a second 328.

[chris ables]

http://www.rctimer.com/index.php?gOo=go ... oductname= heres the gps add on for that board ! It's priced fair also!

[copterrichie]

http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=763&productname= heres the gps add on for that board ! It's priced fair also!

The above unit requires this in order to work with a Promini/328: http://www.rctimer.com/index.php?gOo=go ... oductname=

[brettwal]

I have successfully run a serial GPS attached to the serial port of the older Crius SE w/o the i2c pins. It works perfectly fine. You just have to disconnect it when you use the FTDI for GUI

[captaingeek]

so will this run the latest mw firmwares without issue?

[copterrichie]

It should, just if GPS is wanted, then it will required the additions mentioned above.