DIY FPV PCB's

Post Reply
MikeDalton
Posts: 14
Joined: Fri Dec 05, 2014 7:04 pm
Location: Derby, UK
Contact:

DIY FPV PCB's

Post by MikeDalton »

Just thought I'd post my collection of FPV PCBs for anyone interested in building there own budget 5.8Ghz system.

The boards are built around the Boscam RX5008 and TX5823 modules.
There are two receiver boards, one using a DIP switch to change channels, the other incorporates the RX5808-PRO project found on google code (https://code.google.com/p/rx5808-pro/)

I will post my diversity receiver main board once I have finished writing the Arduino code.

Simple power conditioner for FPV camera PCB
https://dl.orangedox.com/BklNFOhgaPxSLkKBks/FPV%20CAM%20POWER%20FILTER.rar

Mini FPV transmitter PCB
https://dl.orangedox.com/tzfkqSGqsZ4BxKbBMj/TX5823%205.8GHZ%20TX%20MODULE.rar

FPV receiver PCBs
https://dl.orangedox.com/xh5LXByUv53Q4udtGs/RX5808%205.8GHZ%20RX%20MODULE.rar

Some pictures and info can be found here
https://plus.google.com/u/0/communities/109626624833199914132

I hope this interests someone!

Cheers, Mike.

Post Reply