Minimosd voltage not displaying

Post Reply
hydro psyche
Posts: 17
Joined: Sat Mar 22, 2014 9:32 pm

Minimosd voltage not displaying

Post by hydro psyche »

Guys,

I'm at my wits end with this minimosd...I just got done building out my mini FPV quad and testing the minimosd shows no voltage displaying. The voltage field displays on the OSD, but it's at 0. I have a hot lead from the power harness going to bat2 on the minim, and of course a ground from the harness to ground on the board. I have this working on another quad running a Multiwii FC, the one with the issue is running a naze board, but I don't think either matters since the voltage is being read directly by the minimosd...is it just late and I'm missing something obvious? this is the last pain point i need to work through before I can get airborne. thanks

waltr
Posts: 733
Joined: Wed Jan 22, 2014 3:21 pm
Location: Near Philadelphia, Pennsyvania, USA

Re: Minimosd voltage not displaying

Post by waltr »

Which minimOSD board? The one from Whitespy?
Is it this same board that is working on another quad?
Is the Vbat measurement enabled in the GUI?

Post Reply