hi there.
im a newbie. i have just finished building and setting up my first f450 quad. but when i try to take off, the flips in the forward direction. can i get some help on this please
quadcopter flips forward and spins round on take off
-
- Posts: 4
- Joined: Sat Dec 20, 2014 8:09 pm
quadcopter flips forward and spins round on take off
Last edited by cityjasper on Mon Feb 23, 2015 6:32 pm, edited 1 time in total.
Re: quadcopter flips forward and sins round on take off
Read the MultiWii WIKI, Beginner's troubleshooting and follow the entire setup procedure.
This is a common beginner's problem due to misconnecting motor/esc, RX and/or improper TX setup.
This is a common beginner's problem due to misconnecting motor/esc, RX and/or improper TX setup.
-
- Posts: 4
- Joined: Sat Dec 20, 2014 8:09 pm
Re: quadcopter flips forward and spins round on take off
i have double checked my motors and esc's. can you throw some light on RX and/or improper TX setup
Re: quadcopter flips forward and spins round on take off
Did you actually mount the flight controller the right way around? Also check that the escs are plugged into the correct ports.
-
- Posts: 4
- Joined: Sat Dec 20, 2014 8:09 pm
Re: quadcopter flips forward and spins round on take off
m mounted the flight controller with the arrow facing the front of the quad. and i have checked that the esc's are plugged to the right ports. does the position of the flight controller matter. like (front, back)