Armed but no effect

Post Reply
thetemplar
Posts: 2
Joined: Sat Aug 16, 2014 12:32 am

Armed but no effect

Post by thetemplar »

Hi everyone,
I am currently trying to install a Multiwii Pro into my plane, which looks fine so far.

But when i arm, the servo-output does not work.
The GUI shows "Arm" and the bars on the top-right indicate servo movement, but there is none.
Neither output port moves a servo, what did I do wrong?

I didnt changed much in the config besides setting it to Airplane and enabling flaps.

User avatar
haydent
Posts: 583
Joined: Sun Jun 17, 2012 1:35 am
Location: NSW, AU

Re: Armed but no effect

Post by haydent »

just a wild guess, are you using the right motor outputs ? maybe have a look at the config servo settings

thetemplar
Posts: 2
Joined: Sat Aug 16, 2014 12:32 am

Re: Armed but no effect

Post by thetemplar »

What exactly do you mean? PInwise?
I checked it on all output pins, there is no pin that updates the servo. Sadly I don't have a Oszilloscope to verify that.
In the config I changed nothing regards servos.

Arakon
Posts: 196
Joined: Thu Jul 17, 2014 2:22 pm

Re: Armed but no effect

Post by Arakon »

Do the servo ports you are using have power?

Post Reply