MultiWii 32bit SW for VTOL - please advise

MultiWii 32bit SW for VTOL - please advise

Postby Sirod » Sun Sep 04, 2016 2:16 am

I have been making simple modifications on MW2.3 for 8 bit controllers to get mixers for motors and servos for VTOLS (tricopter and bicopters based).
There are also some codes for transitioning.

My question are there already any arduino-like environment out there on the 32 bits baseflight or cleanflght for similar application ?
I know there are CLI commands, but I think they are quite restrictive.

Sirod
Sirod
 
Posts: 5
Joined: Mon Nov 11, 2013 4:52 am

Re: MultiWii 32bit SW for VTOL - please advise

Postby PatrikE » Mon Sep 05, 2016 7:14 am

You can use Eclipse to code.
It's not the easiest to setup though!

Easiest is to use Kiel light version.(32kb limit)
http://www2.keil.com/mdk5/install
And use gcc to compile as a free option.

Baseflight works nicely with Kiel or Eclipse.
Cleanflight with Eclipse
PatrikE
 
Posts: 1921
Joined: Tue Apr 12, 2011 6:35 pm
Location: Sweden

Re: MultiWii 32bit SW for VTOL - please advise

Postby Sirod » Tue Sep 06, 2016 2:42 am

Thanks Patrick

I will give these a try. So the first option is free, but the Eclipse I have to buy, right.

Sirod
Sirod
 
Posts: 5
Joined: Mon Nov 11, 2013 4:52 am

Re: MultiWii 32bit SW for VTOL - please advise

Postby PatrikE » Tue Sep 06, 2016 8:18 am

Eclipse is open source and free.
Keil have a free version that have a limit size on compiler.
But there's always ways to unlock for the handy man..;)
PatrikE
 
Posts: 1921
Joined: Tue Apr 12, 2011 6:35 pm
Location: Sweden


Return to General discussions

Who is online

Users browsing this forum: No registered users and 1 guest