Hi!
I have an Afroflight Naze32, being configured with the awesome chrome GUI... everything standard and it works and flies excellent using my radio.
I fly in a motion capture lab, and I send commands via a telemetry modem to several other multiwii boards, like the AIO pro from HK... like in this video: https://www.youtube.com/watch?v=suD0DdpGi8k
That being said, I wanted to use the 32 bit version of multwii... I wrote a python library which I'm using with my AIO and they work great, I get data at 60 hertz...
Video: https://www.youtube.com/watch?v=TpcQ-TOuOA0
Code: https://github.com/alduxvm/pyMultiWii
I was doing a test today (first one) using the naze32 hooked up to a raspberry pi. The rpi will get joystick commands from a ground station using UDP (wifi) and will send commands via a usb cable to the naze32. This is tested and working on my AIO, but in the naze32 is not working, the board is not arming... and then my question is:
Does the naze32 is programmed to work and listen the MSP_SET_RAW_RC messages????
Thanks!
MSP_SET_RAW_RC on Afroflight Naze32
Re: MSP_SET_RAW_RC on Afroflight Naze32
yes, it does
"set serialrx_type=4" for msp
wiki : https://github.com/multiwii/baseflight/ ... upner-SUMD
code : https://github.com/multiwii/baseflight/ ... bf3788b597
"set serialrx_type=4" for msp
wiki : https://github.com/multiwii/baseflight/ ... upner-SUMD
code : https://github.com/multiwii/baseflight/ ... bf3788b597
Re: MSP_SET_RAW_RC on Afroflight Naze32
That worked great Marc!
Thanks a lot!
Thanks a lot!
Re: MSP_SET_RAW_RC on Afroflight Naze32
Sorry to awake this old subject...
I have a question regarding MSP with naze32...
So, in order to do the rc override, I need to do "set serialrx_type=4", once I do that, the standard RC does not work anymore, if I want to switch to this radio I need to "set serialrx_type=0"...
first question: is there a way to make it listen to the msp and the standard radio at the same time??
second question: when I'm in using the standard RC, I ask via MSP the rc channel readout (105) but, it returns nothing... just zeros... is there something wrong?
thanks a lot!
I have a question regarding MSP with naze32...
So, in order to do the rc override, I need to do "set serialrx_type=4", once I do that, the standard RC does not work anymore, if I want to switch to this radio I need to "set serialrx_type=0"...
first question: is there a way to make it listen to the msp and the standard radio at the same time??
second question: when I'm in using the standard RC, I ask via MSP the rc channel readout (105) but, it returns nothing... just zeros... is there something wrong?
thanks a lot!