Anyone know of a link for a guide on using u center and what settings to change for optimum multi rotor performance. I've got it all working on ucenter but would like to understand what I'm fiddling with.
Cheers
GPS settings
GPS settings
AFAIK there are three main settings, one change the protocol to UBX and set the baud rate, change the number of updates per second the GPS will output and three disable all the unneeded serial messages in order not to waste cycle time of the uC. Basically that's it.
You may experience between pedestrian vs airborne mode as some people will say pedestrian is more accurate for position hold.
You may experience between pedestrian vs airborne mode as some people will say pedestrian is more accurate for position hold.
Re: GPS settings
Firmware initializes GPS on connect anyway...............................
Re: GPS settings
Ok. Will baseflight set baudrate on gps? I thought we changed thebaud rate in CLI to match GPS setting.
Re: GPS settings
its all automatic for ublox.
you dont need to do anything.
you dont need to do anything.
Re: GPS settings
Hello there
Can you give me the good parameter must insttaler in GPS Ublox NEO6M.
At the moment I have configured the Baud 115200.
I followed the settings I found on the website of Sale:
http://www.drotek.fr/ftp/pdf/Guide% 20Ublox.pdf
He speaks of useful settings that must be configured not to loudir signial the RX-TX?
Bonjour
Pouvez-vous me donner les bon paramètre qui faut insttaler dans le GPS Ublox NEO6M.
Pour le moment j ai configuré le Baud a 115200.
J'ai suivi le réglage que je trouve sur ce site de vente:
http://www.drotek.fr/ftp/pdf/Guide%20Ublox.pdf
Il parle de reglages utile qui faut parametrée pour ne pas a loudir le signial RX-TX ??
Can you give me the good parameter must insttaler in GPS Ublox NEO6M.
At the moment I have configured the Baud 115200.
I followed the settings I found on the website of Sale:
http://www.drotek.fr/ftp/pdf/Guide% 20Ublox.pdf
He speaks of useful settings that must be configured not to loudir signial the RX-TX?
Bonjour
Pouvez-vous me donner les bon paramètre qui faut insttaler dans le GPS Ublox NEO6M.
Pour le moment j ai configuré le Baud a 115200.
J'ai suivi le réglage que je trouve sur ce site de vente:
http://www.drotek.fr/ftp/pdf/Guide%20Ublox.pdf
Il parle de reglages utile qui faut parametrée pour ne pas a loudir le signial RX-TX ??
Re: GPS settings
Just saw ESRC(external source configuration) settings in U Center on my UBLOX NEO6. Mine is set to none. Would this need to be set to Fequ source, time source or feed back ext osc for Naze to auto config at start up? I'm not satisfied with this GPS performance yet.
Re: GPS settings
Set gps_type=1 for UBLOX and you're done.