Naze32 issue when adding horizon to aux channel

Post Reply
paco76
Posts: 26
Joined: Tue Sep 22, 2015 10:31 pm

Naze32 issue when adding horizon to aux channel

Post by paco76 »

Hi guys,

Recently I starter to use a non-full naze32 rev 5 and have some issues. Actually the main issue I'm facing isb hat when I add an horizon mode to my aux channel, a led light appears on my flight controller. I tried to calibrate. I recalibrated also the accelerometri, but nothing changed. The horizon mode activates this red light on the board ad you can see in the video below. I tried to flight anyway in horizon mode just yo see what happened and the drone started to behave like if no PIDs were configured. Thank u in advance!

https://youtu.be/AE3t8J5lets

Cereal_Killer
Posts: 221
Joined: Fri Mar 06, 2015 5:44 am

Re: Naze32 issue when adding horizon to aux channel

Post by Cereal_Killer »

If you havent learned yet that light is the self-leveling light. It would come on in either angle or horizon modes and doesnt mean anything is wrong... Not sure what sort of other issue you may be having since you didnt show that. HTH

Post Reply