Naze32 9XR PRO DJT D8R-XP NEO-M8N - no gsdp/galt

Post Reply
sz4dy
Posts: 2
Joined: Sun Nov 23, 2014 8:24 am

Naze32 9XR PRO DJT D8R-XP NEO-M8N - no gsdp/galt

Post by sz4dy »

I've got configuration as above..
telemetry is working fine, showing rssi, main lipo voltage, baro alititude etc.. when I've hooked up gps today for the first time, proper latitude/longtitude showed up at telemetry screen but gspd and galt is all the time 0.. is there anything I'm missing in naze32/9xr pro configuration?
Please help

scrat
Posts: 925
Joined: Mon Oct 15, 2012 9:47 am
Location: Slovenia

Re: Naze32 9XR PRO DJT D8R-XP NEO-M8N - no gsdp/galt

Post by scrat »

Turn off Telemetry and GPS will work. I hope you've set in CLI feature GPS and for uBlox gps_type = 1 and gps_baudrate = 0.

sz4dy
Posts: 2
Joined: Sun Nov 23, 2014 8:24 am

Re: Naze32 9XR PRO DJT D8R-XP NEO-M8N - no gsdp/galt

Post by sz4dy »

I've set:
feature SOFTSERIAL
feature TELEMETRY
set softserial_baudrate=9600
set softserial_1_inverted=1
set telemetry_port=1
set telemetry_provider=0
gps_type = 1
gps_baudrate = 0

and connected gps as its shown in this piture:
http://x-inferno.com/wp-content/uploads ... 85x256.jpg

As I said - my position, longtitue and latitude is shown on telemetry screen (so gps is working and telemetry), there is no speed and altitude don't know why..

Post Reply