PSoC 4 CY8CKIT-049 4xxx Prototyping Kits

Post Reply
copterrichie
Posts: 2261
Joined: Sat Feb 19, 2011 8:30 pm

PSoC 4 CY8CKIT-049 4xxx Prototyping Kits

Post by copterrichie »

The CY8CKIT-049 Prototyping kits support both the ARM® 32-bit Cortex-M0™ CY8C41xx and CY8C42xx device families. The PSoC 4 devices are the most reconfigurable ARM based processor providing programmable analog and digital blocks with flexible routing and interconnects. The CY8CKIT-049 Prototyping kits are also CapSense enabled as both the CMOD and CTANK capacitors necessary for CapSense and CapSense Proximity designs are loaded by default. As always the PSoC 4 device family and the CY8CKIT-049 are supported through the completely free development platform PSoC Creator.

Supports USB-Serial Controllers

The CY8CKIT-049 provides customers with a USB PC connection using the Cypress USB-Serial device family (CY7C6521x). The device used on the CY8CKIT-049 is the CY7C65211 configurable USB bridge controller. This USB-Serial device supports USB-UART, USB-GPIO, USB-I2C, and USB-SPI configurations. The device family also supports CapSense button control and USB-IF Battery Charging applications. The CY7C65211 device on the CY8CKIT-049 Prototyping kit is by default a USB-UART serial bridge. The USB-Serial device provides USB-UART communication through a COM port and UART bootloading using the Bootloader Host tool included in PSoC Creator. The CY7C65211 is designed to support the PSoC 4 and to be a development platform for USB-Serial users. The USB-Serial portion of the kit can be removed from the PSoC 4 main board by ‘snapping’ the two boards apart along the perforated edge. The USB-Serial board supports open GPIO and serial communication headers for USB-Serial development.

http://www.cypress.com/?rID=92146

User avatar
Rob
Posts: 77
Joined: Sun Apr 03, 2011 4:40 pm

Re: PSoC 4 CY8CKIT-049 4xxx Prototyping Kits

Post by Rob »

Thanks for this information, I ordered a few for evaluation.

Best regards,

Rob

copterrichie
Posts: 2261
Joined: Sat Feb 19, 2011 8:30 pm

Re: PSoC 4 CY8CKIT-049 4xxx Prototyping Kits

Post by copterrichie »

you are most welcome Rob,



Wow, here is a arm cortex M0 port: http://www.rcgroups.com/forums/showpost ... tcount=684

User avatar
Rob
Posts: 77
Joined: Sun Apr 03, 2011 4:40 pm

Re: PSoC 4 CY8CKIT-049 4xxx Prototyping Kits

Post by Rob »

Thanks copterrichie,

Thanks, now I'm also addicted to this PSoc controler.
Already have building Some products with it.

For quick test I use:

http://www.cypress.com/?rid=77780

Time to port Multiwii to PSoc?

Post Reply