Where do I find details to Flyduino MW32v2

Post Reply
Slartibartfast
Posts: 4
Joined: Mon Apr 14, 2014 8:41 am

Where do I find details to Flyduino MW32v2

Post by Slartibartfast »

Hi,
I've just ordered a Flyuduino MW32 v2. I've taken a look at the PDF but this is not very detailled.
i.e. where do I find "S1" for my upcoming tricopter? How do I know which "Filter Capacitor" to use?

Or do I just take a look at the Naze32? :roll: (I did not find a description for a capacitor for the Naze32, too. :?: )

Thanks and greetings.

(Yes, I've searched the forum and asked google and could not find it, just in case you have an obvious link comes up. Sorry if I have not found it)

timecop
Posts: 1880
Joined: Fri Sep 02, 2011 4:48 pm

Re: Where do I find details to Flyduino MW32v2

Post by timecop »

How about you contact the clowns you bought that Chinese shit from?

Slartibartfast
Posts: 4
Joined: Mon Apr 14, 2014 8:41 am

Re: Where do I find details to Flyduino MW32v2

Post by Slartibartfast »

timecop wrote:How about you contact the clowns you bought that Chinese shit from?


Really, that's it? Very productive, thanks. Could we go on please?

User avatar
treym
Posts: 258
Joined: Sat Jul 21, 2012 12:28 am

Re: Where do I find details to Flyduino MW32v2

Post by treym »

Slartibartfast wrote:Hi,
I've just ordered a Flyuduino MW32 v2. I've taken a look at the PDF but this is not very detailled.
How do I know which "Filter Capacitor" to use?



by looking a the doc you linked , they use a 16v 100mf .

S1 , is Signal 1 , there is picture in the document you linked

Slartibartfast
Posts: 4
Joined: Mon Apr 14, 2014 8:41 am

Re: Where do I find details to Flyduino MW32v2

Post by Slartibartfast »

treym wrote:by looking a the doc you linked , they use a 16v 100mf .

S1 , is Signal 1 , there is picture in the document you linked


Thank you very much!! :D

bob4432
Posts: 51
Joined: Sat Jan 29, 2011 2:51 am
Location: USA

Re: Where do I find details to Flyduino MW32v2

Post by bob4432 »

Slartibartfast wrote:
timecop wrote:How about you contact the clowns you bought that Chinese shit from?


Really, that's it? Very productive, thanks. Could we go on please?


I doubt that tc gave them the rights to make his Naze32 and then they do a shit job of support, posting links back to tc's posts here for him to support their unauthorized hardware. tc converted MW to run on 32bit not Flyduino.

So how would you feel if somebody took your IP, made the hardware and then offloaded the support to the original designer? Also they are using an older design and charge you more than if you would have bought the original. So I feel tc's response was appropriate. And they always leave 1 part off, so you have to do the final assembly because of some euro selling practice. Just like they do w/ the esc32.

Buy the original, up-to-date Naze32 from the guy who originally made it and you would get a finished product and support. Doubt you will get much support around here unless it is from somebody else who fell for the same shit.

bob4432

User avatar
treym
Posts: 258
Joined: Sat Jul 21, 2012 12:28 am

Re: Where do I find details to Flyduino MW32v2

Post by treym »


User avatar
Plüschi
Posts: 433
Joined: Thu Feb 21, 2013 6:09 am

Re: Where do I find details to Flyduino MW32v2

Post by Plüschi »

This looks very very similar to the flip32 * just costs way more **. Still comes with the same non-functional *** speksat connector i guess.
Get the original, its CHEAPER, has MORE FEATURES and you get support.

* V2 version, V1 was a total (dangerous) failure with reversed esc connector polarity.
** germans are constantly brainwashed into buy from overpriced local resellers. The amount of hidden sales-pitch in german forums is mindboggling.
** wired to the wrong serial port.

Slartibartfast
Posts: 4
Joined: Mon Apr 14, 2014 8:41 am

Re: Where do I find details to Flyduino MW32v2

Post by Slartibartfast »

OK. You guys really make sense. I should have done a better research. I promise to get the original Naze32 v5 now.
So PitchPump is the exclusive reseller for Germany? Just wanna do it right this time.

Thanks :|

User avatar
Plüschi
Posts: 433
Joined: Thu Feb 21, 2013 6:09 am

Re: Where do I find details to Flyduino MW32v2

Post by Plüschi »

Plüschi wrote:germans are constantly brainwashed into buy from overpriced local resellers.

Slartibartfast wrote:So PatchPimp is the exclusive reseller for Germany?


You are german, right?

Get it here : http://abusemark.com/store

bob4432
Posts: 51
Joined: Sat Jan 29, 2011 2:51 am
Location: USA

Re: Where do I find details to Flyduino MW32v2

Post by bob4432 »



CC BY NC SA

User avatar
treym
Posts: 258
Joined: Sat Jul 21, 2012 12:28 am

Re: Where do I find details to Flyduino MW32v2

Post by treym »

did they use this file for commercial usage ? no .. or maybe they did it wrong :)

Post Reply