Hi!
I require your help regarding a problem I’m encountering.
I just bought a flight controller do make my own drone.
I choosed the MWC Multiwii SE V2.6 (from Amazon :https://www.amazon.ca/gp/product/B06XHJVXQX/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1)
The issue is that I downloaded the MultiWii and Arduino and when I tried to upload the software on the board it’s very long and at the end I encounter an error… I can see that the FTDI flashes so something is been pushed on the card but it just don’t works.
The FTDI I use is this one https://www.amazon.ca/gp/product/B078W6 ... UTF8&psc=1 and I’m doing the manipulation on my computer (Windows 10).
Do you have any idea what I can do to make it work?
Thank you so much in advance for your help!
Need help issue flashing CRIUS Multiwii SE v2.6 controller
Re: Need help issue flashing CRIUS Multiwii SE v2.6 controll
Enable minimum options.
This should compile with your FC
Then make sure you have correct serial port selected in Arduino.
And probably Arduino PRO mini 5V 16Mhz as processor.
This should compile with your FC
Code: Select all
#define QUADX
#define HK_MultiWii_328P
Then make sure you have correct serial port selected in Arduino.
And probably Arduino PRO mini 5V 16Mhz as processor.