Can someone please tell me in which MultiWii file/s the resonator frequency is set. I am using an FC that is using a Atmega32U4 running at 16mHz at 3.3v and want to experiment trying to run it at 8mHz so that the Atmega is not running overclocked.
Thanks for any help and/or suggestions overclocked
Select resonator frequency in MultiWii code
- Pedro14755
- Posts: 49
- Joined: Tue Jul 14, 2015 12:56 am
- Location: Canberra Australia
- Contact:
Select resonator frequency in MultiWii code
Last edited by Pedro14755 on Mon Oct 02, 2017 11:48 am, edited 1 time in total.
-
- Posts: 103
- Joined: Fri Dec 12, 2014 5:16 pm
Re: Select resonator frequency in MultiWii code
Have you passed the correct resonator frequency (cpu speed) to the compiler in the first place? To test this can you run a blink code on you 8MHz board?
This should start (not sure about working) with 8MHz
This should start (not sure about working) with 8MHz
- Pedro14755
- Posts: 49
- Joined: Tue Jul 14, 2015 12:56 am
- Location: Canberra Australia
- Contact:
Re: Select resonator frequency in MultiWii code
Sorry about the VERY LATE reply gregd72002 I must not have notifications set to email me when a reply is posted to my questions. I ended up running the Atmega32u4 at 5v / 16mHz which alleviated the overclocked situation when it was running at 3.3v