Page 1 of 1
Probably been asked a million times
Posted: Mon Sep 08, 2014 6:47 pm
by Supertrowel
Hi.
I am a newb were the naze 32 is concerned.
I can't get the driver to work on my mac,
Could you please point me in the right direction please.
Just dosnt recognise the USB port.
Thanks for your time in advance
Posted: Mon Sep 08, 2014 8:21 pm
by vyizis
What version of osx are you using?
Re: Probably been asked a million times
Posted: Mon Sep 08, 2014 9:46 pm
by Supertrowel
The latest
Probably been asked a million times
Posted: Mon Sep 08, 2014 11:09 pm
by vyizis
If by latest you mean 10.10 then that's your problem right there
Re: Probably been asked a million times
Posted: Mon Sep 08, 2014 11:20 pm
by Supertrowel
IOS X
Why would that be a problem? :/
Will see if I can revert somehow
Probably been asked a million times
Posted: Mon Sep 08, 2014 11:32 pm
by vyizis
Apple changed the rules and the kernel level driver will not load on startup with the current SiLabs driver package as it is not signed.
They will be releasing a new driver package when the final version of the os is released.
Re: Probably been asked a million times
Posted: Tue Sep 09, 2014 2:40 pm
by Supertrowel
Cool thank you
I just went out and bought a cheap note book.
And I still can't get the driver working?
What am I doing that's wrong..
Re: Probably been asked a million times
Posted: Tue Sep 09, 2014 5:07 pm
by waltr
Supertrowel wrote:Cool thank you
I just went out and bought a cheap note book.
And I still can't get the driver working?
What am I doing that's wrong..
What OS on the notebook???????
What have you done/tried??
I have been able to install the SiLabs driver on Win8.1 without issues.
Re: Probably been asked a million times
Posted: Wed Sep 10, 2014 9:33 am
by Supertrowel
I downloaded the windows Xp version.
Un zip files then select driver package installer.
Select run program.
It then tells me I'm ready to connect my device.
Press finish.
Go to google base flight
Com port 1
115200
Press connect
Serial port successfully opened with id 21
No configuration within 10 seconds, communication failed
Serial port successfully closed
Re: Probably been asked a million times
Posted: Wed Sep 10, 2014 4:00 pm
by waltr
In the Windows Device Manager did you check that the USB really is on COM 1?????
Re: Probably been asked a million times
Posted: Wed Sep 10, 2014 4:43 pm
by Supertrowel
Yes
Re: Probably been asked a million times
Posted: Wed Sep 10, 2014 7:32 pm
by waltr
Strange! Is there anything connected to the TDX/RDX lines on the naze?
It is always best to start with just the FC board and nothing else connected except the USB.
Of course it could be a bad board. If it still doesn't work contact the seller for an RMA.
Re: Probably been asked a million times
Posted: Thu Sep 11, 2014 7:09 pm
by Supertrowel
its probably just me
Re: Probably been asked a million times
Posted: Fri Sep 12, 2014 8:34 am
by Supertrowel
I dont suppose their is anyone from the UK on here?
Preferably Devon area